Konica-minolta bizhub 282 User Manual Page 51
- Page / 90
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2
Administrator Operations
2-34 362/282/222
Administrator Operations Chapter 2
2.6.3 Setting the Encryption Key (encryption word)
2
Note
When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. Be sure to allow an interval of 10
sec. or more in order to ensure correct operations.
Turn off the sub power switch → Turn off the main power switch → Turn
on the main power switch → Turn on the sub power switch
NEVER forget the Encryption Key set through the above procedure. The
Encryption Key must be entered when changing canceling the Encryption
Key .
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
<Setting can be made only from the control panel>
0 For the procedure to call the HDD Management to the display, see steps
1 and 2 of “Setting the HDD Lock Password” on page 2-25.
1 Call the HDD Management screen to the display from the control panel.
2 Touch [Encryption Set-
ting].
- Ver. 1.01 1
- Contents 2
- 3 User Operations 3
- 362/282/222 x-3 4
- Security 6
- 1 Security 7
- Security Chapter 1 10
- 1.2 Security Functions 11
- 1.3 Data to be Protected 13
- 1.5 Miscellaneous 16
- Administrator Operations 18
- 2 Administrator Operations 19
- 3 Enter the 8-digit Admin 20
- 2 Touch [Admin. Manage 20
- 4 Touch [Enter] 21
- 1 Start the Web browser 22
- 5 Click the [Log-in] 22
- 6 Click the [Logout] 24
- 2 Touch [Admin. 2] 27
- 3 Touch [Security Setting] 28
- 4 Touch [Enhance Securi 28
- 5 Touch [ON] to enable the 28
- 6 Touch [Enter] 28
- 7 Make sure that a mes 29
- 2 Touch [Unlock] 31
- 3 Select the function, for 31
- Password) 32
- 2 Touch [Admin. 1] 33
- 3 Touch [Admin. Set] 33
- 4 Touch [Administrator 33
- 5 Touch [Current Code] 34
- 6 Touch [New Code] and 34
- 7 Touch [Retype New 34
- 8 Touch [Enter] 35
- 2.5 User Box Function 36
- 2 Click the [User Box] tab 37
- 4 Click the [Set] 37
- 7 Click the [Apply] 39
- 11 Click the [Apply] 40
- 2 Touch [HDD Manage 42
- 3 Touch [HDD Lock Set 43
- 4 Touch [Input Password] 43
- 5 Touch [New Password] 43
- 6 Enter the 20-digit HDD 44
- 7 Touch [Enter] 44
- 8 Touch [Confirm New 44
- 9 Enter the 20-digit HDD 45
- 10 Touch [Enter] 45
- 11 Touch [Enter] 45
- 12 A message appears that 45
- 13 Touch [Enter] 45
- 14 Make sure that a mes 46
- 2 Touch [Change Pass 47
- 3 Enter the currently regis 47
- 2 Touch [Encryption Set 51
- 3 Touch [Input] 52
- 4 Touch [New Encryption 52
- 5 Enter the new 20-digit 52
- 7 Touch [Re-enter Encryp 53
- 8 Enter the 20-digit En 53
- 9 Touch [Enter] 53
- 11 A message will appear 54
- 12 Touch [Enter] 54
- 13 Make sure that a mes 54
- 14 The following screen ap 54
- 16 Touch [Format] 55
- 17 Touch [Yes] 55
- 18 Touch [Enter] 55
- 19 When HDD formatting is 55
- 2 Touch [Change] 56
- 5 Touch [New Encryption 57
- 6 Enter the new 20-digit 57
- 8 Touch [Re-enter Encryp 58
- 9 Enter the 20-digit En 58
- 12 A message will appear 59
- 15 The following screen ap 60
- 17 Touch [Format] 60
- 18 Touch [Yes] 60
- 19 Touch [Enter] 60
- 20 When HDD formatting is 61
- 2 Touch [Overwrite All Da 63
- 3 Touch [Yes] 63
- 2.8 Network Setting Function 64
- 2-50 362/282/222 67
- User Operations 68
- 1 Press the [Box] key 70
- 2 Touch [Secure Print] 70
- 3 Touch [Secure Print ID] 70
- 4 Enter the Secure Print ID 70
- 5 Touch [Enter] 70
- 7 Select the target Secure 71
- 8 Enter the 8-digit Secure 71
- 10 Check the document in 72
- 4 Click the [User Box] tab 73
- User Operations Chapter 3 74
- 2 Touch [Retrieve from 77
- 4 Touch the relevant in 77
- 7 Touch [Set] 78
- 8 Enter the 8-digit User 78
- 5 Select the target User 78
- 6 Touch [User Box No.] 78
- 10 Select the target User 79
- 11 Touch [Action] 79
- 3 Click the [Set] 80
- 5 Click the [Apply] 81
- 4 Click the [Apply] 86
- 9 Click the [Apply] 89
Related products and manuals for Printers Konica-minolta bizhub 282
Printers Konica-minolta AU-211P User Manual
(65 pages)
(65 pages)
(180 pages)
Printers Konica-minolta bizhub 42 User Manual
(158 pages)
(158 pages)
Printers Konica-minolta eCopy User Manual
(224 pages)
(224 pages)
Printers Konica-minolta Unity User Manual
(100 pages)
(100 pages)
Printers Konica-minolta IC-601 User Manual
(123 pages)
(123 pages)
Printers Konica-minolta BIZHUB 223 User Manual
(302 pages)
(302 pages)
© 2020, manymanuals.com. All rights reserved. | 1.260 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals