Konica-minolta bizhub 20 User Manual download pdf (Page 46)

Scanning

Brightness 2

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average.

You can set the Brightness level by dragging the slide bar to the right or left to lighten or darken the image.

You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is

too dark, set a higher Brightness level and scan the document again.

Note

The Brightness setting is only available when Black & White, Gray or True Gray is chosen.

Contrast 2

You can increase or decrease the Contrast level by moving the slide bar to the left or right. An increase

emphasizes dark and light areas of the image, while a decrease reveals more detail in gray areas. You can

also enter a value in the box to set the Contrast.

Note

The Contrast setting is only available when Gray or True Gray is chosen.

When scanning photographs or other images for use in a word processor or other graphics application, try

different settings for the contrast and resolution to see which setting best suits your needs.

Document Size 2

Choose one of the following sizes:

 A4 210 × 297 mm

 JIS B5 182 × 257 mm

 Letter 215.9 x 279.4 mm

 Legal 215.9 x 355.6 mm

 A5 148 x 210 mm

 Executive 184.1 x 266.7 mm

 Business Card 90 x 60 mm

To scan business cards, choose the Business Card size, and then place the business card face down in

the center of the left hand side of the scanner glass, as indicated by the document guidelines on the

machine.

 Photo 10 x 15 cm

 Index Card 127 x 203.2 mm

 Photo L 89 x 127 mm

 Photo 2L 13 x 18 cm

 Postcard 1 100 x 148 mm

 Postcard 2 (Double) 148 x 200 mm

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 226 227

No comments

Konica-minolta bizhub 20 User Manual Page 46