Konica-minolta bizhub 20 User Manual download pdf (Page 122)

PC-FAX Software

114

PC-FAX receiving 6

Note

• The PC-FAX software can only receive Black & White fax documents.

• If your PC is protected by a firewall and is unable to use PC-FAX receive, you may need to configure the

firewall settings to allow communication through port number 54926 and 137. (See Before using the

KONICA MINOLTA software on page 119.)

Depending on the operating system you are using, you may get a Security Alert message when you start

the PC-FAX receiving feature. To enable PC-FAX receiving, you must unblock the program.

The PC-FAX Receive Software lets you view and store faxes on your PC. It is automatically installed when

you install the Multi-Function Suite and works on locally or network connected machines.

When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will

automatically be sent to your PC.

If you turn your PC off, your machine will continue to receive and store your faxes in its memory. The machine

LCD will display the number of stored faxes received, for example:

PC Fax Msg:001

When you switch your PC on, the PC-FAX Receive Software automatically transfers your faxes to your PC.

To enable the PC-FAX Receive Software, do the following:

 Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on the

machine.

 Run the PC-FAX Receive software on your PC. (We recommend you select the Add to Startup folder

check box, so that the software automatically runs and can transfer any faxes on PC startup.)

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 226 227

No comments

Konica-minolta bizhub 20 User Manual Page 122