Status, Error, and Service Messages
137
PAPER JAM
TRAY X
Media has misfed while being
pulled from the specified tray
(
X
).
Locate and remove the mis-
feed.
PUT
“SIZE”
“TYPE”
IN TRAY 1
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 1.
This message appears when
PAPER MENU/INPUT
TRAY/TRAY 1 MODE
is set
to
CASSETTE
.
When
PAPER MENU/
INPUT TRAY/AUTO
CONTINUE
is set to ON:
Printing continues with paper
of a different size, even if this
message appeared.
To print using paper of the
desired size, load paper of
the correct size, and then try
printing again.
When PAPER MENU/
INPUT TRAY/AUTO
CONTINUE
is set to
OFF
:
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
PUT
“SIZE”
“TYPE”
IN TRAY 2
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 2. This message appears
when
PAPER MENU/INPUT
TRAY/AUTO CONTINUE
is
set to
OFF.
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
REPLACE
OPC DRUM
Waste toner bottle is full. Replace the drum cartridge.
REPLACE X
TONER
The
X
toner cartridge is empty.
This message appears when
the QUALITY/TONER OUT
ACTION
menu is set to
STOP.
Replace the toner cartridge.
X TONER
MISSING
The
X
toner cartridge is not
installed.
Install a
X
toner cartridge.
This
message...
means... do this...
Comments to this Manuals