Specifying Settings From the Control Panel
3
C252 3-117
Specifying Settings From the Control Panel Chapter 3
3.28 LPD Settings
The use of LPD when printing can be enabled or disabled.
To specify LPD settings
1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2 In the Network Setting screen, touch [9 Detail Setting].
3 In the Detail Setting screen, touch [7 LPD Setting].
The LPD Setting screen appears.
4 Touch [Enable] or [Disable].
5 Touch [OK].
The use of LPD is enabled or disabled.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
Comments to this Manuals