2
Network printing
2-8 NC-503
NetWare server/client (except NDPS)
1 Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2 Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to “Connecting the computer and this machine
over a network” on page 2-15.)
3 Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to “Connecting the computer and this
machine over a network” on page 2-15.)
NetWare server/client (NDPS)
1 Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2 From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to “Specifying an IP address” on page 2-9.)
3 Print the settings information, and then check the settings. (Refer to
“Printing the settings information” on page 2-13.)
– If optional fax kit FK-506 and image controller IC-206 are not in-
stalled, the settings information cannot be printed from the ma-
chine’s control panel.
4 Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to “Connecting the computer and this machine
over a network” on page 2-15.)
5 Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to “Connecting the computer and this
machine over a network” on page 2-15.)
Comments to this Manuals