Konica-minolta NC-503 User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 244
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
2
Network printing
2-6 NC-503
LPR/PORT9100 printing
1 Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2 From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to “Specifying an IP address” on page 2-9.)
3 Print the settings information, and then check the settings. (Refer to
“Printing the settings information” on page 2-13.)
If optional fax kit FK-506 and image controller IC-206 are not in-
stalled, the settings information cannot be printed from the ma-
chine’s control panel.
4 Install the printer driver.
If the GDI driver is to be installed, refer to the User’s Guide for the
GDI printer controller, included with this machine. If the PCL driver
(optional) is to be installed, refer to the User’s Guide for image con-
troller IC-206, included with the IC-206 option.
5 Add the network port to the computer. (Refer to “Connecting the com-
puter and this machine over a network” on page 2-15.)
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 243 244

Comments to this Manuals

No comments