Konica-minolta magicolor 2590MF User Manual download pdf (Page 56)

Print Media42

 Wet (or damp)

" Keep media between 35% and 85% relative humidity. Toner does

not adhere well to moist or wet media.

 Layered

 Adhesive

 Folded, creased, curled, embossed, warped, or wrinkled

 Perforated, three-hole punched, or torn

 Too slick, too coarse, or too textured

 Different in texture (roughness) on the front and back

 Too thin or too thick

 Stuck together with static electricity

 Composed of foil or gilt; too luminous

 Heat sensitive or cannot withstand the fusing temperature (180°C

[356°F])

 Irregularly shaped (not rectangular or not cut at right angles)

 Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

 Acidic

 Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m

(24 lb bond) is referred to as thick stock. Test all

thick stock to ensure acceptable performance and to ensure that the image

does not shift.

You can print continuously with thick stock. However, this could affect the

media feed, depending on the media quality and printing environment. If

problems occur, stop the continuous printing and print one sheet at a time.

" 43 lb bond is also referred to as 90 lb index stock.

Capacity Tray 1 Up to 50 sheets, depending on their thick-

ness

Tray 2 Not supported

Driver

Media Type

Thick Stock

Weight 91 to 163 g/m² (25 to 43 lb bond)

Duplexing Not supported

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 235 236

No comments

Konica-minolta magicolor 2590MF User Manual Page 56