Konica-minolta magicolor 2590MF User Manual Page 194
- Page / 236
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Solving Other Problems180
Printing
takes too
much time.
The machine is set to
a slow printing mode
(for example, thick
stock or transpar-
ency).
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The machine is set to
power saving mode.
It takes time for printing to start in
power saving mode.
The job is very com-
plex.
Wait. No action needed.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
(
X TONER INCOR-
RECT
is displayed in
the message win-
dow).
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific machine.
Blank pages
are printed.
One or more of the
toner cartridges are
defective or empty.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
The wrong media is
being used.
Check that the media type.
Not all pages
print.
The Cancel key was
pressed.
Make sure no one pressed the Cancel
key while your job was printing.
The tray is empty. Check that the tray is loaded with
media, in place, and secure.
A document is printed
with an overlay file
which has been cre-
ated by a magicolor
2590MF printer
driver.
Print the overlay file using a magicolor
2590MF printer driver.
Some parts
of the image
are lost with
2in1 copying.
If the Media type is
Envelope and the
zoom ratio for 2in1
copying will be less
than 50%, the zoom
ratio is set to 50%.
Press the + or , key to adjust the
zoom ratio.
Symptom Cause Solution
- Printer / Copier / 1
- Scanner User’s 1
- Thank You 2
- Trademarks 2
- Copyright Notice 2
- SOFTWARE LICENSE AGREEMENT 3
- Legal Restrictions on Copying 5
- For EU member states only 6
- Contentsii 8
- Contentsiv 10
- Contents 11
- Contentsvi 12
- Contentsviii 14
- 1 Introduction 15
- Space Requirements 16
- Installation Precautions 16
- Part Names 17
- Rear View 18
- Front View with Options 19
- Rear View with Options 19
- Printer Drivers 20
- Scanner Drivers 20
- Applications CD-ROM 21
- System Requirements 22
- 2 Control Panel and 25
- Configuration 25
- About the Control Panel 26
- About the Control Panel14 28
- About the Control Panel16 30
- Display Indications 30
- About the Control Panel18 32
- RENOTIAMERGNIN 33
- TX/RX RESULT 34
- PRINT REPORT 34
- CONFIGURATION PAGE 35
- DEMO PAGE 35
- Main screen 36
- Configuration Menu Overview 37
- Configuration Menu Overview24 38
- Configuration Menu Overview26 40
- MACHINE SETTING Menu 41
- Configuration Menu Overview28 42
- PAPER SOURCE SETUP Menu 43
- Configuration Menu Overview30 44
- COPY SETTING Menu 44
- FAX REGISTRATION Menu 45
- TX SETTING Menu 45
- Configuration Menu Overview32 46
- RX SETTING Menu 46
- COMM. SETTING Menu 46
- REPORTING Menu 46
- USER SETTING Menu 47
- Configuration Menu Overview34 48
- DIRECT PRINT Menu 48
- NETWORK SETTING Menu 49
- Configuration Menu Overview36 50
- E-MAIL SETTING Menu 50
- SCANNER SETTING Menu 51
- Configuration Menu Overview38 52
- 3 Media Handling 53
- Print Media 54
- Print Media42 56
- Print Media44 58
- OK to use 59
- Print Media46 60
- " The envelope 62
- Loading Media 63
- 1 Remove the lid from Tray 1 63
- " When loading 64
- 5 Reattach the lid 65
- " Before loading enve 67
- 7 Open the scanner unit 69
- Loading Media58 72
- 3 Remove the lid from Tray 2 76
- 6 Reattach the lid to Tray 2 77
- 7 Reinsert Tray 2 into the 77
- About Duplex Printing 78
- Output Bin 80
- Media Storage 82
- Original Media 83
- Original Media70 84
- 1 Lift to open the ADF cover 85
- 3 Gently close the ADF cover 86
- 4 Using the Printer 87
- 9 Click Apply 89
- Windows XP/Server 2003/Vista 90
- Windows 2000 90
- Windows XP/Server 2003 90
- Windows Vista 91
- Printer Driver Settings 92
- Basic Tab 93
- Printer Driver Settings80 94
- Layout Tab 94
- Overlay Tab 94
- Watermark Tab 94
- Quality Tab 94
- Device Options Setting Tab 95
- Version Tab 95
- Printer Driver Settings82 96
- 5 Using Direct Print 97
- Camera Direct Photo Printing 98
- " A USB cable is not 99
- 6 Using the Copier 101
- Making Basic Copies 102
- 1 Press the Quality key 103
- " Each press of the 104
- 1 Press the Function key 105
- 1 Press the 2in1 key 106
- Making Advanced Copies 106
- 2 Press the Function key 107
- Making Advanced Copies94 108
- Making Advanced Copies96 110
- 1 Press the Collate key 111
- Making Advanced Copies98 112
- 7 Using the Scanner 113
- Making Basic Scans100 114
- Scanning via USB 114
- Making Basic Scans 115
- Windows TWAIN Driver Settings 115
- Making Basic Scans102 116
- Windows WIA Driver Settings 116
- Making Basic Scans104 118
- Scan to E-mail using the ADF 119
- 14 Press the Start key 123
- Specifying a Recipient 124
- Using the Speed Dial Function 125
- Specifying a Recipient112 126
- Registering Recipients 129
- Registering Recipients116 130
- Speed Dialing 131
- Registering Recipients118 132
- Group Dialing 133
- Registering Recipients120 134
- Basic Scan to PC Operation122 136
- Scan to PC using the ADF 136
- Basic Scan to PC Operation 137
- Basic Scan to PC Operation124 138
- 8 Replacing 139
- Consumables 139
- Replacing the Toner Cartridge 140
- 2 Press the TC Change key 143
- 4 Open the scanner unit 144
- " Before opening the 145
- 10 Remove the cover from the 147
- 13 Close the front cover 148
- 16 Press the Stop/Reset key 149
- Replacing the drum cartridge 150
- 2 Open the scanner unit 151
- " Do not touch the OPC 153
- 9 Maintenance 155
- Maintaining the Machine 156
- 70.5 lbs 157
- Cleaning the machine 158
- Interior 159
- Cleaning the machine148 162
- Cleaning the machine150 164
- 1 Open the duplex cover 165
- Cleaning the machine152 166
- 1 Open the ADF feed cover 168
- 3 Close the ADF feed cover 168
- Storing the machine 169
- Storing the machine156 170
- 10 Troubleshooting 171
- Introduction 172
- Preventing Media Misfeeds 173
- Understanding the Media Path 174
- Clearing Media Misfeeds 174
- Clearing Media Misfeeds162 176
- 6 Remove any misfed media 180
- 7 Return the fuser separator 180
- 12 Remove any misfed paper 182
- 13 Reattach the lid 183
- 16 Remove any misfed paper 184
- 20 Reinsert Tray 2 185
- 3 Lift to open the ADF cover 187
- 4 Remove any misfed media 188
- 5 Close the ADF cover 188
- 6 Close the ADF feed cover 188
- Solving Other Problems 192
- Solving Other Problems180 194
- Solving Other Problems182 196
- TONER LOW 203
- X TONER EMPTY 203
- Status Messages 205
- Error Messages 206
- Service Messages 213
- 11 Installing 215
- Accessories 215
- Duplex Option 217
- 3 Prepare the duplex option 218
- 4 Install the duplex option 219
- " Make sure that both 220
- Installing Tray 2 221
- Tray 2208 222
- A Appendix 223
- Technical Specifications 224
- Technical Specifications212 226
- Entering Text 228
- Entering Text216 230
- Changing Input Mode 230
- Inputting Example 230
- Numerics 233
Related products and manuals for Printers Konica-minolta magicolor 2590MF
Printers Konica-minolta bizhub C451 User Manual
(102 pages)
(102 pages)
Printers Konica-minolta bizhub C20X User Manual
(346 pages)
(346 pages)
Printers Konica-minolta IC-413 User Manual
(106 pages)
(106 pages)
Printers Konica-minolta bizhub 25 User Manual
(175 pages)
(175 pages)
© 2020, manymanuals.com. All rights reserved. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals