Konica-minolta bizhub C3850 User Manual download pdf (Page 52)

[Description of Utility Keys] 5-24

5.8 [Fax Settings]

[RX Mode ] Select a receive mode.

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this option

when this machine is used with a telephone connected to it, which is fre-

quently used, and if you always prefer to receive faxes manually.

[Auto RX] is specified by default.

[Ring Pattern] Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection)

service is used.

When this machine receives a call signal of the selected pattern, fax receiving

starts automatically.

[Normal Ring] is specified by default.

Note

In general use, set this to [Normal Ring]. If DRPD is set by mistake in a region

where DRPD cannot be used, it will result in a fax receiving failure.

[Number of RX Call

Rings]

If necessary, change the number of times the phone rings before automatically

receiving a fax.

The default value depends on the region the machine is used in.

[Number of Redials] If the machine fails to send a fax successfully, it automatically redials the same

destination after a certain period of time has elapsed. If necessary, change the

number of redials.

The default value depends on the region the machine is used in.

[Redial Interval] If necessary, change the redial intervals when you specified a value in [Number

of Redials].

[3 min.] is specified by default.

[Line Monitor] Select whether or not to play sounds on the telephone line from speakers dur-

ing fax communication.

[OFF] is specified by default.

[Line Monitor Sound

Volume (Send)]

Monitors sounds output from the machine. Specify the monitor sound volume

between 0 and 8.

This function is available only when [Line Monitor Sound] is set to [Until Con-

nection Complete] or [Until Transmission Complete].

[3] is specified by default.

Note

When communicating with fax, monitoring sound is generated even if send or

receive monitoring sound of this machine is set to [0] since the sound is gen-

erated both on this machine and on the destination side. For setting to mute,

set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume

(Receive)] to [0], or set [Line Monitor] to [OFF].

[Line Monitor Sound

Volume (Receive)]

Monitors sounds output from the recipient, including switching equipment or

TA. Specify the monitor sound volume between 0 and 8.

This function is available only when [Line Monitor Sound] is set to [Until Con-

nection Complete] or [Until Transmission Complete].

[4] is specified by default.

Note

When communicating with fax, monitoring sound is generated even if send or

receive monitoring sound of this machine is set to [0] since the sound is gen-

erated both on this machine and on the destination side. For setting to mute,

set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume

(Receive)] to [0], or set [Line Monitor] to [OFF].

[Manual RX V.34 OFF] Select whether or not to automatically release the V.34 mode when manually

receiving a fax (G3).

[Enable] is specified by default.

Settings Description

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 66 67

Comments to this Manuals

No comments

Konica-minolta bizhub C3850 User Manual Page 52

Comments to this Manuals

Related products and manuals for Printers Konica-minolta bizhub C3850