Konica-minolta Konica Digital Revio KD-400Z User Manual download pdf (Page 38)

Selecting the Shooting Mode (Cont’d)

Switching the Flash Mode

AUTO (Auto Flash)

- This is the normal mode. When the camera is turned ON, it is set at Auto

(Auto Flash). No symbol will be displayed on the LCD monitor.

- The flash will operate automatically when it is dark.

• The red light after the flash indicates charging; while it is lit, you cannot take a

picture.

• The shutter speed when flash is used is about max. 1/60 sec. Be careful not to

shake when pressing the shutter.

• It is best to use the red-eye reduction when using a flash with people.

Flash Shooting Distances

Focus Distance Shooting Distance

Wide-Angle * 0.5m (1.6ft) to 3.5m (9.9ft)

Telephoto ** 0.5m (1.6ft) to 2.0m (6.6ft)

• If the shooting range is not in the above range, the picture may appear too bright

when it is too close, and the picture may appear dark without enough lighting when

it is too far. It is recommended you check the photo with the LCD monitor after

shooting.

Red-Eye Reduction

- Using this mode can reduce the “red-eye phenomenon”, which is people

with red glaring eyes caused by the flash.

- When you press the shutter button, the pre-flash comes on, followed by

the real flash which finishes the shot.

• Until the real flash comes on, do not move the camera or let the subject move.

• If the subject is not facing the pre-flash or final flash, or the distance to the subject

is too far, the red-eye reduction effect may not be apparent.

• The flash is in the AUTO flash mode and will not come on in a bright place.

* Equivalent to 39 mm in

35mm

camera

conversion

**Equivalent to 117mm in

35mm camera

conversion

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 116 117

No comments

Konica-minolta Konica Digital Revio KD-400Z User Manual Page 38