Konica-minolta Konica Digital Revio KD-400Z User Manual download pdf (Page 27)

Card Removal

Inserting/Removing Cards (Cont’d)

1. Open the battery/card cover.

2. If you gently push in on the card, the lock

will release and the card will come out a

little. Then carefully draw the card out.

3. Again, close the battery/card cover.

Warning! Insert or remove cards only after making sure that absolutely

all power is OFF as indicated by the viewfinder LED being

off.

While the card is being accessed, or an image is being processed,

the LCD monitor will show “Now COPY…”, etc., and the red LED

will come on.

If you open the battery/card cover while the red LED is flashing,

image processing may be interrupted or hindered.

While the red LED is still lit, make sure that you DO NOT open the

battery/card cover.

• When a card is inserted, it is recorded on first. (When a card is not inserted,

internal memory is used for recording. However, in this case the recording

image size is limited to only 640 × 480 pixels.)

• Also, it is possible to insert and use two cards simultaneously, such as an

SD memory card (or multi-media card) and a Memory Stick.

In this case the card being used will be recorded on first. By using the Set-

up menu, you can select which to record to first (p.96).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 116 117

No comments

Konica-minolta Konica Digital Revio KD-400Z User Manual Page 27