Registering/Settings
10
bizhub 360 10-5
Registering/Settings Chapter 10
5 Press [Name] and then enter the name of Address Book.
– For the operation of the entering character, see page 14-3.
– The name can be up to 24 characters.
– In [No.], an unused number is displayed.
6 Enter the FAX number of the destination on the keypad.
– The following key can be used.
– [Tone] : When using a rotary dialing (pulse) telephone line,
press [Tone] to select push-button tone mode. This is
used when using a FAX information service and so
forth when Tone is selected. A “T” is displayed on the
screen.
– [Pause]: Press [Pause] to insert a space in a dialed number.
Pressing [Pause] once creates an interval of one sec-
ond between numbers. Multiple spaces can also be
entered. A "P" is displayed on the screen.
– [-] : This is entered as a separation symbol when dialing.
It has no effect on dialing. A "-" is displayed on the
screen.
– : Moves the cursor to the left.
– : Moves the cursor to the right.
– [Delete] : Characters on the position of the cursor are deleted
one by one.
When the cursor is at the right end, the character are
deleted from the rear end.
– [Out side] : When the [PBX ON Set] is ON, [Out side] can be spec-
ified. By selecting it, [E-] is displayed.
Refer to p. 11-57 for more information about PBX CN
Set.
– Up to 38 digits can be entered.
– When an erroneous input is made, correct it by pressing [Delete] to
delete characters one at a time, or pressing [C] (clear) to delete all.
– When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is
displayed on the screen.
Comments to this Manuals