Konica-minolta C250P User Manual Page 36
- Page / 498
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation and operation precautions
1
C250P 1-17
1.4 Space requirements
To ensure that machine operation, consumables replenishing, part replace-
ment, and regular maintenance can easily be performed, adhere to the rec-
ommended space requirements detailed below.
2
Reminder
Be sure to allow a clearance of 100 mm (4 inch) or more at the back of
this machine for the ventilation duct.
Unit: mm (inch)
C250P+FS-603+PC-403
285
(11-1/4)
1251
(49-1/4)
313
(12-1/4)
437
(17-1/4)
712
(28)
100
(4)
930 (36-1/2)
- User’s Guide 1
- OpenSSL License 3
- Original SSLeay License 4
- SOFTWARE LICENSE AGREEMENT 6
- Contents 8
- 4 Control panel settings 13
- 5 Loading copy paper 14
- 6 Replacing consumables 14
- 7 Maintenance 15
- 8 Troubleshooting 15
- 9 Additional settings 16
- 10 Appendix 17
- WARNING , CAUTION 18
- Introduction 19
- C250P x-18 19
- Installation and operation 20
- 1.1 Safety information 21
- 1.2 Regulation notices 28
- Print head 30
- Laser aperture 30
- * Only for the U.S.A 33
- 1.4 Space requirements 36
- 1.5 Operation precautions 37
- C250P 1-35 54
- 1 Set the power switch to 58
- 1.8 Connecting to a computer 62
- Setting up the printer 64
- 5 Install the screen fonts 67
- C250P 2-6 69
- 2 Click “Printer Install” 71
- 4 Click the [Next] button 74
- 11 Click the [Next] button 77
- 8 Click the [Finish] button 82
- 8 Click the [Close] button 86
- C250P 2-26 89
- 9 Click the [OK] button 91
- 10 Close the Chooser window 91
- 2.3 Printing operations 94
- 1 Start up the Web browser 103
- NetWare 5.x/6 IPX NDS Pserver 116
- TCP/IP NDPS(lpr) 116
- 2 Start up Pconsole 118
- 2 Start up NWadmin 120
- 8 Click the [Apply] button 131
- C250P 2-70 133
- Setting up the printer driver 133
- Specifying printer driver 134
- 3 Click the Option tab 138
- Item Function 140
- 1 Click the Setup tab 143
- C250P 3-11 144
- 3 Click the [OK] button 145
- 4 Click the [OK] button 154
- 4 Click the Overlay tab 158
- 5 Select “Print Overlay” 158
- 8 Click the [OK] button 159
- 8 Click the [Save] button 161
- 10 Click the [OK] button 161
- 1 Click the Watermark tab 162
- 3 Click the [Edit] button 163
- 1 Click the Quality tab 168
- 2 Specify each setting 168
- 1 Click the “Font” tab 169
- 5 Click the [OK] button 169
- C250P 3-48 181
- C250P 3-53 186
- 1 Click the Layout tab 187
- C250P 3-64 197
- 2 Click the [Save] button 198
- 6 Click the [OK] button 199
- 1 Click the Paper tab 204
- C250P 3-75 208
- Specifies offset 212
- 2 Select “Page Attributes” 214
- 2 Select “Custom Page Sizes” 215
- 3 Click the [New] button 215
- 2 Select “General” 217
- 2 Select “Layout” 218
- C250P 3-91 224
- C250P 3-96 229
- 2 Select “Paper Feed” 233
- 2 Select “Security” 233
- 2 Select “Finishing” 236
- 2 Select “Quality” 237
- 2 Select “Setup” 239
- 4 Click the “OK” button 241
- C250P 3-110 243
- Control panel settings 244
- 4.1 Control panel 245
- 3 Press the [→] key 246
- 5 Press the [→] key 249
- 8 Press the [→] key 249
- C250P 4-11 254
- Job Operation menu 254
- C250P 4-12 255
- Paper Tray menu 255
- C250P 4-13 256
- User Setting menu 256
- C250P 4-14 257
- C250P 4-15 258
- C250P 4-16 259
- Admin. Setting menu 259
- C250P 4-17 260
- C250P 4-18 261
- C250P 4-19 262
- C250P 4-20 263
- C250P 4-21 264
- C250P 4-22 265
- C250P 4-23 266
- C250P 4-24 267
- C250P 4-25 268
- C250P 4-26 269
- C250P 4-27 270
- C250P 4-28 271
- Capture” cannot be changed 272
- “OpenAPI” cannot be changed 272
- C250P 4-30 273
- Banner Print menu 273
- 4.3 Parameters 274
- is selected while a 277
- C250P 4-52 295
- Loading copy paper 296
- A: 3/16 inch 303
- B: 3/16 inch 303
- C: 3/16 inch 303
- Setting” on page 4-33 304
- 1 Pull out the Tray 1 305
- 2 Press down on the pa 305
- 3 Slide the lateral guides 305
- 4 For paper exceeding 11 306
- 5 Load the paper into the 306
- 6 Close the Tray 1 306
- 7 Pull up the upper right 307
- 8 Push up the fusing unit 307
- 9 Push down the left and 307
- C250P 5-14 309
- 1 Pull out the paper tray 310
- 3 Load the paper into the 310
- 4 Close the paper tray 311
- 1 Press the tray release 313
- 2 Pull out the LCT 313
- 4 Load the paper into the 314
- 5 Close the LCT 314
- 1 Open the bypass tray 316
- 4 Pull up the upper right 317
- 5 Push up the fusing unit 317
- 6 Push down the left and 317
- C250P 5-23 318
- Reminder 318
- C250P 5-24 319
- C250P 5-25 320
- Flap side 320
- Side to be 321
- Paper Weight Paper Size 324
- 24-1/4 lb to 55-1/2 lb — 326
- C250P 5-32 327
- Replacing consumables 328
- 7 CAUTION 330
- C250P 6-4 331
- 1 Open the machine’s 332
- 2 Pull up the locking tab of 333
- 3 Prepare the new toner 333
- 4 Remove the new toner 334
- 5 Align the toner cartridge 334
- 6 Close the front door 334
- 6.2 Replacing the staples 336
- 1 Slide the finisher away 337
- 2 Turn the jammed-staple 337
- 3 Pull the staple cartridge 337
- 4 Remove the staple car 338
- 5 Load the new staple car 338
- 6 Peel the tape off of the 338
- 7 Insert the staple car 339
- 1 Open the front door of 340
- 2 Turn misfeed-clearing 340
- 3 Slowly pull out the sta 341
- 4 Grasp both sides of the 341
- 5 Press the button marked 341
- 6 Pull up the staple case 342
- 7 Remove the staple car 342
- 8 Load the new staple car 342
- 9 Press the staple case 343
- 10 Peel the tape off of the 343
- 11 Insert the staple car 343
- 12 Insert the staple car 344
- 14 Close the front door 344
- 1 Open the front door 345
- 2 Remove the staple car 345
- 3 Remove the empty car 345
- 4 Load the new staple car 346
- 5 Insert the staple car 346
- 1 Raise the print output 347
- 2 Press in the area marked 347
- 3 Remove the empty sta 348
- 5 Slowly pull off the seal 349
- 6 Insert the staple car 349
- 8 Pull the handle of the 349
- 2 Pull the waste toner re 351
- 3 Remove the waste toner 351
- 4 Install the new waste 352
- 5 Remove filter 1, and then 352
- Maintenance 354
- 1 Clean the surface of the 355
- 2 Slowly pull out the 357
- 2 Remove the cleaning 358
- 3 Insert the cleaning tool 358
- 2 Pull out the hole-punch 360
- 3 Empty the hole-punch 361
- 5 Close the front door 363
- C250P 7-11 364
- C250P 7-12 365
- Troubleshooting 366
- 2 Use the power switch to 367
- 3 Unplug the machine 367
- C250P 8-3 368
- No. Code Description 371
- 1 Remove all paper from 372
- 2 If the misfed paper can 372
- 1 Open the automatic du 373
- 2 Carefully pull out any 373
- 1 Pull up the upper right 374
- 5 Close the Tray 1 374
- 1 Pull up the center right 375
- 5 Close the Tray 2 375
- 1 Pull up the lower right 376
- 5 Close the paper tray 376
- 3 Pull up the upper right 379
- 4 Open inside cover M1 379
- 5 Pull out any paper 380
- 2 Push up the fusing unit 382
- 3 Push up the M2 release 382
- 4 Pull out any misfed pa 383
- 5 Pull inside cover M3 to 383
- 6 Close the fusing unit 383
- 7 Close the upper right 384
- 2 Open inside cover M1 386
- 3 Pull out any paper 387
- 4 Push up the M2 release 387
- 6 Pull out any misfed pa 388
- 7 Pull inside cover M3 to 388
- 8 Close the fusing unit 388
- 9 Close the upper right 389
- 2 Open the horizontal 391
- 3 Close the horizontal 391
- 4 Open front door FN4 392
- 5 Turn misfeed-clearing 392
- 6 Close front door FN4 392
- 7 While holding misfeed 392
- 8 Open upper cover FN1 393
- 9 Open misfeed-clearing 393
- 10 While holding misfeed 393
- 11 Close upper cover FN1 393
- 12 If job separator is in 394
- 13 Remove any misfed pa 394
- 15 While holding misfeed 394
- 4 Open the front door of 396
- 6 Open the upper door of 397
- 7 Close the upper door 398
- 8 Remove all paper fed 398
- 9 Open the misfeed-clear 398
- 10 Open the right-side 398
- 11 If the paper could not be 399
- 12 Close the front door of 399
- 1 Pull the finisher release 400
- 2 Grab the finisher at “2” 400
- 3 Open the front door 401
- 4 Raise lever FN1, turn dial 401
- 5 Lower guide FN3, and 401
- 7 Turn dial FN4 to feed the 402
- 8 Turn dial FN5 or dial 402
- 2 Turn dial FN5 or dial FN6 404
- 3 While pressing down le 404
- 4 Pull handle FN8 to open 405
- 5 Pull out any paper in the 405
- 7 Close the front door 405
- 3 Remove all paper from 406
- 4 Open the misfeed-clear 407
- 4 Swing open the shutter 410
- 5 Open the front door of 412
- 6 Turn misfeed-clearing 412
- 7 Remove all paper fed 413
- 8 Open the Right-side 413
- 9 Clockwise turn the mis 413
- 10 Slowly pull out the sta 414
- 11 Turn misfeed-clearing 414
- 12 Grasp both sides of the 414
- 13 Swing open the shutter 415
- 14 Pull out toward you the 415
- 16 Insert the staple car 415
- 17 Insert the staple car 416
- 18 Carefully move the sta 416
- 19 Close the front door 416
- 2 Open the front door 417
- 3 Raise lever FN1, turn dial 417
- 4 Lower guide FN3, and 418
- 6 Turn dial FN4 to feed the 418
- 7 Turn dial FN5 or dial 419
- 9 Remove the staple car 420
- 10 Swing open the shutter 420
- 13 Close the front door 421
- 2 Raise lever FN1, turn dial 422
- 3 Lower guide FN3, and 422
- 5 Turn dial FN4 to feed the 423
- 6 Turn dial FN5 or dial 424
- 7 Open the misfeed-clear 424
- 9 Raise the finishing tray 424
- 8.6 Simple troubleshooting 427
- Additional settings 434
- No. Item Description 436
- C250P 9-7 440
- 9.2 Box operations 449
- 4 Click [OK] 451
- 9.3 Managing print jobs 458
- C250P 9-26 459
- Setting procedure 459
- C250P 9-27 460
- 2 “Job Operation” appears 461
- C250P 9-31 464
- Press the [Menu/Select] key 464
- The document is printed 464
- 2 Click the Setup tab 465
- 9 Open the bypass tray 471
- C250P 9-39 472
- Appendix 474
- 10.2 Configuration page 484
- 10.3 Font list 485
- C250P 10-13 486
- PS font list 486
- 10.4 Test page 487
- 10.5 Glossary 488
- C250P 10-24 497
- Copyright 498
Related products and manuals for Printers Konica-minolta C250P
Printers Konica-minolta 920 User Manual
(76 pages)
(76 pages)
Printers Konica-minolta IC-202 User Manual
(134 pages)
(134 pages)
Printers Konica-minolta bizhub C300 User Manual
(198 pages)
(198 pages)
Printers Konica-minolta bizhub 750 User Manual
(526 pages)
(526 pages)
(57 pages)
Printers Konica-minolta BIZHUB C30P User Manual
(276 pages)
(276 pages)
Printers Konica-minolta IP-411 User Manual
(241 pages)
(241 pages)
Printers Konica-minolta 7022 User Manual
(4 pages)
(4 pages)
Printers Konica-minolta Pi2001e User Manual
(34 pages)
(34 pages)
Printers Konica-minolta bizhub C10P User Manual
(168 pages)
(168 pages)
Printers Konica-minolta bizhub 180 User Manual
(256 pages)
(256 pages)
© 2020, manymanuals.com. All rights reserved. | 0.058 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals