Konica-minolta C250P User Manual Page 285
- Page / 498
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Control panel settings
4
C250P 4-42
System Setting
!
Detail
“Set Date” appears only if “Time Adjustment” in the “Admin. Setting”
menu is set to “ON”.
If “Enhanced Security” is set to “ON”, the administrator is logged off from
Administrator mode according to the time specified for “Auto Reset”.
User Box Oper.
Parameters Description Initial Setting
Daylight Saving Select whether or not the machine’s internal
clock observes daylight saving time, and
specify the time difference for daylight saving
time between 1 and 150 minutes.
OFF
Auto Reset Specify the setting (between 1 and 9 minutes
or “OFF”) for the desired length of time until
the automatic system reset operation is per-
formed.
1 Min.
Date/Time Setting Specify the date, time and time zone for the
machine’s internal clock.
—
Set Date “Set Date” appears only if “Time Adjustment”
in the “Admin. Setting” menu is set to “ON”.
—
Parameters Description Initial Setting
Delete User Box Deletes boxes. —
Del. Secure Doc. Deletes confidential documents. —
- User’s Guide 1
- OpenSSL License 3
- Original SSLeay License 4
- SOFTWARE LICENSE AGREEMENT 6
- Contents 8
- 4 Control panel settings 13
- 5 Loading copy paper 14
- 6 Replacing consumables 14
- 7 Maintenance 15
- 8 Troubleshooting 15
- 9 Additional settings 16
- 10 Appendix 17
- WARNING , CAUTION 18
- Introduction 19
- C250P x-18 19
- Installation and operation 20
- 1.1 Safety information 21
- 1.2 Regulation notices 28
- Print head 30
- Laser aperture 30
- * Only for the U.S.A 33
- 1.4 Space requirements 36
- 1.5 Operation precautions 37
- C250P 1-35 54
- 1 Set the power switch to 58
- 1.8 Connecting to a computer 62
- Setting up the printer 64
- 5 Install the screen fonts 67
- C250P 2-6 69
- 2 Click “Printer Install” 71
- 4 Click the [Next] button 74
- 11 Click the [Next] button 77
- 8 Click the [Finish] button 82
- 8 Click the [Close] button 86
- C250P 2-26 89
- 9 Click the [OK] button 91
- 10 Close the Chooser window 91
- 2.3 Printing operations 94
- 1 Start up the Web browser 103
- NetWare 5.x/6 IPX NDS Pserver 116
- TCP/IP NDPS(lpr) 116
- 2 Start up Pconsole 118
- 2 Start up NWadmin 120
- 8 Click the [Apply] button 131
- C250P 2-70 133
- Setting up the printer driver 133
- Specifying printer driver 134
- 3 Click the Option tab 138
- Item Function 140
- 1 Click the Setup tab 143
- C250P 3-11 144
- 3 Click the [OK] button 145
- 4 Click the [OK] button 154
- 4 Click the Overlay tab 158
- 5 Select “Print Overlay” 158
- 8 Click the [OK] button 159
- 8 Click the [Save] button 161
- 10 Click the [OK] button 161
- 1 Click the Watermark tab 162
- 3 Click the [Edit] button 163
- 1 Click the Quality tab 168
- 2 Specify each setting 168
- 1 Click the “Font” tab 169
- 5 Click the [OK] button 169
- C250P 3-48 181
- C250P 3-53 186
- 1 Click the Layout tab 187
- C250P 3-64 197
- 2 Click the [Save] button 198
- 6 Click the [OK] button 199
- 1 Click the Paper tab 204
- C250P 3-75 208
- Specifies offset 212
- 2 Select “Page Attributes” 214
- 2 Select “Custom Page Sizes” 215
- 3 Click the [New] button 215
- 2 Select “General” 217
- 2 Select “Layout” 218
- C250P 3-91 224
- C250P 3-96 229
- 2 Select “Paper Feed” 233
- 2 Select “Security” 233
- 2 Select “Finishing” 236
- 2 Select “Quality” 237
- 2 Select “Setup” 239
- 4 Click the “OK” button 241
- C250P 3-110 243
- Control panel settings 244
- 4.1 Control panel 245
- 3 Press the [→] key 246
- 5 Press the [→] key 249
- 8 Press the [→] key 249
- C250P 4-11 254
- Job Operation menu 254
- C250P 4-12 255
- Paper Tray menu 255
- C250P 4-13 256
- User Setting menu 256
- C250P 4-14 257
- C250P 4-15 258
- C250P 4-16 259
- Admin. Setting menu 259
- C250P 4-17 260
- C250P 4-18 261
- C250P 4-19 262
- C250P 4-20 263
- C250P 4-21 264
- C250P 4-22 265
- C250P 4-23 266
- C250P 4-24 267
- C250P 4-25 268
- C250P 4-26 269
- C250P 4-27 270
- C250P 4-28 271
- Capture” cannot be changed 272
- “OpenAPI” cannot be changed 272
- C250P 4-30 273
- Banner Print menu 273
- 4.3 Parameters 274
- is selected while a 277
- C250P 4-52 295
- Loading copy paper 296
- A: 3/16 inch 303
- B: 3/16 inch 303
- C: 3/16 inch 303
- Setting” on page 4-33 304
- 1 Pull out the Tray 1 305
- 2 Press down on the pa 305
- 3 Slide the lateral guides 305
- 4 For paper exceeding 11 306
- 5 Load the paper into the 306
- 6 Close the Tray 1 306
- 7 Pull up the upper right 307
- 8 Push up the fusing unit 307
- 9 Push down the left and 307
- C250P 5-14 309
- 1 Pull out the paper tray 310
- 3 Load the paper into the 310
- 4 Close the paper tray 311
- 1 Press the tray release 313
- 2 Pull out the LCT 313
- 4 Load the paper into the 314
- 5 Close the LCT 314
- 1 Open the bypass tray 316
- 4 Pull up the upper right 317
- 5 Push up the fusing unit 317
- 6 Push down the left and 317
- C250P 5-23 318
- Reminder 318
- C250P 5-24 319
- C250P 5-25 320
- Flap side 320
- Side to be 321
- Paper Weight Paper Size 324
- 24-1/4 lb to 55-1/2 lb — 326
- C250P 5-32 327
- Replacing consumables 328
- 7 CAUTION 330
- C250P 6-4 331
- 1 Open the machine’s 332
- 2 Pull up the locking tab of 333
- 3 Prepare the new toner 333
- 4 Remove the new toner 334
- 5 Align the toner cartridge 334
- 6 Close the front door 334
- 6.2 Replacing the staples 336
- 1 Slide the finisher away 337
- 2 Turn the jammed-staple 337
- 3 Pull the staple cartridge 337
- 4 Remove the staple car 338
- 5 Load the new staple car 338
- 6 Peel the tape off of the 338
- 7 Insert the staple car 339
- 1 Open the front door of 340
- 2 Turn misfeed-clearing 340
- 3 Slowly pull out the sta 341
- 4 Grasp both sides of the 341
- 5 Press the button marked 341
- 6 Pull up the staple case 342
- 7 Remove the staple car 342
- 8 Load the new staple car 342
- 9 Press the staple case 343
- 10 Peel the tape off of the 343
- 11 Insert the staple car 343
- 12 Insert the staple car 344
- 14 Close the front door 344
- 1 Open the front door 345
- 2 Remove the staple car 345
- 3 Remove the empty car 345
- 4 Load the new staple car 346
- 5 Insert the staple car 346
- 1 Raise the print output 347
- 2 Press in the area marked 347
- 3 Remove the empty sta 348
- 5 Slowly pull off the seal 349
- 6 Insert the staple car 349
- 8 Pull the handle of the 349
- 2 Pull the waste toner re 351
- 3 Remove the waste toner 351
- 4 Install the new waste 352
- 5 Remove filter 1, and then 352
- Maintenance 354
- 1 Clean the surface of the 355
- 2 Slowly pull out the 357
- 2 Remove the cleaning 358
- 3 Insert the cleaning tool 358
- 2 Pull out the hole-punch 360
- 3 Empty the hole-punch 361
- 5 Close the front door 363
- C250P 7-11 364
- C250P 7-12 365
- Troubleshooting 366
- 2 Use the power switch to 367
- 3 Unplug the machine 367
- C250P 8-3 368
- No. Code Description 371
- 1 Remove all paper from 372
- 2 If the misfed paper can 372
- 1 Open the automatic du 373
- 2 Carefully pull out any 373
- 1 Pull up the upper right 374
- 5 Close the Tray 1 374
- 1 Pull up the center right 375
- 5 Close the Tray 2 375
- 1 Pull up the lower right 376
- 5 Close the paper tray 376
- 3 Pull up the upper right 379
- 4 Open inside cover M1 379
- 5 Pull out any paper 380
- 2 Push up the fusing unit 382
- 3 Push up the M2 release 382
- 4 Pull out any misfed pa 383
- 5 Pull inside cover M3 to 383
- 6 Close the fusing unit 383
- 7 Close the upper right 384
- 2 Open inside cover M1 386
- 3 Pull out any paper 387
- 4 Push up the M2 release 387
- 6 Pull out any misfed pa 388
- 7 Pull inside cover M3 to 388
- 8 Close the fusing unit 388
- 9 Close the upper right 389
- 2 Open the horizontal 391
- 3 Close the horizontal 391
- 4 Open front door FN4 392
- 5 Turn misfeed-clearing 392
- 6 Close front door FN4 392
- 7 While holding misfeed 392
- 8 Open upper cover FN1 393
- 9 Open misfeed-clearing 393
- 10 While holding misfeed 393
- 11 Close upper cover FN1 393
- 12 If job separator is in 394
- 13 Remove any misfed pa 394
- 15 While holding misfeed 394
- 4 Open the front door of 396
- 6 Open the upper door of 397
- 7 Close the upper door 398
- 8 Remove all paper fed 398
- 9 Open the misfeed-clear 398
- 10 Open the right-side 398
- 11 If the paper could not be 399
- 12 Close the front door of 399
- 1 Pull the finisher release 400
- 2 Grab the finisher at “2” 400
- 3 Open the front door 401
- 4 Raise lever FN1, turn dial 401
- 5 Lower guide FN3, and 401
- 7 Turn dial FN4 to feed the 402
- 8 Turn dial FN5 or dial 402
- 2 Turn dial FN5 or dial FN6 404
- 3 While pressing down le 404
- 4 Pull handle FN8 to open 405
- 5 Pull out any paper in the 405
- 7 Close the front door 405
- 3 Remove all paper from 406
- 4 Open the misfeed-clear 407
- 4 Swing open the shutter 410
- 5 Open the front door of 412
- 6 Turn misfeed-clearing 412
- 7 Remove all paper fed 413
- 8 Open the Right-side 413
- 9 Clockwise turn the mis 413
- 10 Slowly pull out the sta 414
- 11 Turn misfeed-clearing 414
- 12 Grasp both sides of the 414
- 13 Swing open the shutter 415
- 14 Pull out toward you the 415
- 16 Insert the staple car 415
- 17 Insert the staple car 416
- 18 Carefully move the sta 416
- 19 Close the front door 416
- 2 Open the front door 417
- 3 Raise lever FN1, turn dial 417
- 4 Lower guide FN3, and 418
- 6 Turn dial FN4 to feed the 418
- 7 Turn dial FN5 or dial 419
- 9 Remove the staple car 420
- 10 Swing open the shutter 420
- 13 Close the front door 421
- 2 Raise lever FN1, turn dial 422
- 3 Lower guide FN3, and 422
- 5 Turn dial FN4 to feed the 423
- 6 Turn dial FN5 or dial 424
- 7 Open the misfeed-clear 424
- 9 Raise the finishing tray 424
- 8.6 Simple troubleshooting 427
- Additional settings 434
- No. Item Description 436
- C250P 9-7 440
- 9.2 Box operations 449
- 4 Click [OK] 451
- 9.3 Managing print jobs 458
- C250P 9-26 459
- Setting procedure 459
- C250P 9-27 460
- 2 “Job Operation” appears 461
- C250P 9-31 464
- Press the [Menu/Select] key 464
- The document is printed 464
- 2 Click the Setup tab 465
- 9 Open the bypass tray 471
- C250P 9-39 472
- Appendix 474
- 10.2 Configuration page 484
- 10.3 Font list 485
- C250P 10-13 486
- PS font list 486
- 10.4 Test page 487
- 10.5 Glossary 488
- C250P 10-24 497
- Copyright 498
Related products and manuals for Printers Konica-minolta C250P
Printers Konica-minolta 920 User Manual
(76 pages)
(76 pages)
Printers Konica-minolta IC-202 User Manual
(134 pages)
(134 pages)
Printers Konica-minolta bizhub C300 User Manual
(198 pages)
(198 pages)
Printers Konica-minolta bizhub 750 User Manual
(526 pages)
(526 pages)
(57 pages)
Printers Konica-minolta BIZHUB C30P User Manual
(276 pages)
(276 pages)
Printers Konica-minolta IP-411 User Manual
(241 pages)
(241 pages)
Printers Konica-minolta 7022 User Manual
(4 pages)
(4 pages)
Printers Konica-minolta Pi2001e User Manual
(34 pages)
(34 pages)
Printers Konica-minolta bizhub C10P User Manual
(168 pages)
(168 pages)
Printers Konica-minolta bizhub 180 User Manual
(256 pages)
(256 pages)
© 2020, manymanuals.com. All rights reserved. | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals