Konica-minolta bizhub C10 User Manual download pdf (Page 47)

Sending a Fax Manually 41

Sending a Fax Manually

Sending a Fax Manually After Using the Telephone

If the machine is connected to a telephone and the same line is used for both

phoning and faxing, the document can simply be sent after talking with the

recipient over the phone.

This is useful, for example, if you want to tell the recipient that you are send-

ing a fax.

1 Load the document into the ADF.

2 If necessary, change the “Resolution” setting.

" The document image quality can be adjusted by pressing the Resolu-

tion key. For details, refer to “Improving Resolution” on page 34.

3 Pick up the handset and check that the dial tone can be heard.

4 Specify the fax number of the recipient by using the telephone to dial the

fax number.

" The fax number of the recipient can also specified using the keypad in

the control panel of this machine.

" If Pulse is selected as the telephone line type, press the key to tem-

porarily change the line type to Tone.

5 After finishing talking on the phone, the recipient should press the neces-

sary key to start receiving the fax.

Once the recipient’s fax machine is ready, a beep is sounded.

6 Press the Start key to begin scanning and sending the fax.

7 Replace the handset to its cradle.

" To stop the transmission, press the Stop/Reset key. A message

appears, requesting confirmation to cancel the setting. Select “Yes”,

and then press the Menu Select key.

Sending a Fax Manually Using the On Hook Key

1 Load the document into the ADF.

2 If necessary, change the “Resolution” setting.

" The document image quality can be adjusted by pressing the Resolu-

tion key. For details, refer to “Improving Resolution” on page 34.

3 Press the On hook key.

1 ... 46 47 48 ... 92

No comments

Konica-minolta bizhub C10 User Manual Page 47