Konica-minolta bizhub 42 User Manual download pdf (Page 86)

bizhub 42/36 8-6

8.2 Troubleshooting table

8

Main messages and their remedies

If any message other than those listed below appears, perform the operation described in the message.

Message Cause Remedy

[Replenish Paper]

[Replenish paper in Tray o or

select other paper tray.

xxx]

Paper of a suitable size is not

loaded in a paper tray.

Load paper of a suitable size or

select another paper tray.

[Paper Size/Type Mismatch]

[Load the following paper in tray

o.

xxx]

The type and size of the paper

loaded into all of the paper trays

are different.

Load the specified paper into a

paper tray.

[Paper Size Mismatch]

[Load the following paper or

cancel job.

xxx]

The paper size specified from the

Touch Panel is different from the

size of paper loaded in the paper

tray.

Load paper of the correct size

into the indicated paper tray.

[Matching Paper not Available]

[Matching paper size not availa-

ble.

xxx]

Paper of the same size as the

document cannot be selected

with the Auto Paper setting se-

lected in Copy mode.

Load the paper tray with paper of

the same size as the document.

[Replenish paper]

[Replenish paper.

xxx]

The indicated tray has run out of

paper.

Add paper. (p. 7-3)

[Check Scanner Lock Lever]

[Unlock the scanner lock lever.]

The scanner is locked. Cancel the job.

Unlock the scanner.

[Place Original on Glass]

[Unable to scan from ADF with

this original size]

The selected document size can-

not be scanned from the ADF.

Place the document on the origi-

nal glass if it has a size that can-

not be scanned from the ADF.

[Place Original on Glass]

[Unable to scan from ADF with

this zoom ratio.]

The selected zoom ratio (200%

or more) cannot be used to scan

from the ADF.

Place the document on the origi-

nal glass.

[Place Original on ADF]

[Place originals on the

Document Feeder.]

The document is not loaded into

the ADF when scanning a docu-

ment containing pages of differ-

ent sizes.

Load the document into ADF.

[Out of the Range of Auto Zoom]

[Zoom ratio for paper size is out-

lying. Select other paper or

zoom ratio.]

An appropriate zoom ratio can-

not be selected with the Auto

Zoom setting selected.

Specify a zoom ratio between

25% and 400%.

[Duplex Copy Disabled]

[Duplex copy disabled.

Cancel or select:

xxx]

The selected paper type and size

cannot be used with duplex

(double-sided) printing.

Cancel duplex (double-sided)

printing, or change the paper

type and size settings.

[Output Tray Full]

[Output tray full. Remove paper

from the tray.]

Copy cannot be performed be-

cause the paper loading capacity

of the output tray of the dis-

played Finisher FS-529 has

reached the maximum.

Remove all paper from the indi-

cated tray.

[Processing Tray Paper Left]

[Remove paper from finisher

tray]

While paper is present on the

processing tray of Finisher FS-

529, the power switch is turned

on.

Remove paper from the finisher

tray.

[User Authentication

Set user information.]

User authentication settings

have been configured. Copies

cannot be made unless a user

name and correct password are

entered.

Enter the correct user name and

password. (p. 4-12)

[Account Track

Set account information.]

Account track settings have

been configured. Copies cannot

be made unless an account

name and correct password are

entered.

Enter the correct account name

and password. (p. 4-12)

1 ... 85 86 87 ... 109

Comments to this Manuals

No comments