Konica-minolta Magicolor 5430 User Manual

magicolor 5430 DL Warranty Exchange Guide®1760552-001B

Move the Consumables8Move the ConsumablesToner CartridgesOriginal1 Remove all four toner cartridges from the original printer.Exchange2 Partially ins

Move the Consumables 9Transfer Belt UnitExchange3 Slide the waste toner bottle out about 4" (10 cm) in order to install the transfer belt unit la

Move the Consumables10Original2 Remove the left side cover.Original3 Open the right side cover, and then use a coin to loosen the two screws securing

Move the Consumables 11Original5 On the right side of the printer, tighten the two screws again, and then close the cover. Original6 Attach the printe

Move the Consumables12Exchange8 Using a coin, remove the three screws on the exchange printer’s left side cover.Exchange9 Remove the left side cover.

Move the Consumables 13Exchange11 From the left side of the printer, carefully slide in the transfer belt unit.!" If you can’t easily slide in th

Move the Consumables14Exchange14 Slide the waste toner bottle and four toner cartridges completely into the printer, and then close the printer’s fro

Move the Options (If Necessary) 15Move the Options (If Necessary)Duplex OptionOriginal1 Remove the duplex option.Original2 Replace the pieces on the o

Move the Options (If Necessary)16Lower Feeder Unit(s)Original1 Prepare the lower feeder unit(s) for moving.ABC DEF

Move the Options (If Necessary) 17Original2 With the help of another person, lift the printer by its carrying grips, and place it on a flat surface.WA

TrademarksKONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC.magicolor is a trademark

Move the Power Cord and Interface Cables18Move the Power Cord and Interface CablesExchange1 Plug the power cord into the exchange printer and into an

Repack the Original Printer 19Repack the Original PrinterOriginal1 Install the fuser separators.Original2 Replace the tape and packaging inside Tray 1

Original3 Replace the tape on the outside of the printer.Original4 Repack the original printer in the carton in which the exchange printer was shipped

Repack the Original Printer 21Original5 Securely tape the top flaps of the shipping carton closed.Original6 In the Americas, clearly write the RMA (Re

Introduction 1IntroductionThank you for contacting a technical support representative to obtain information about returning your printer for warranty

Unpack the Exchange Printer2Unpack the Exchange PrinterAttentionUse caution when unpacking the exchange printer, so the packaging can be used to repa

Unpack the Exchange Printer 3Exchange3 Remove the tape and packing material from the inside of the exchange printer.Exchange4 Remove the fuser separat

Unpack the Exchange Printer4Exchange5 Remove the tape and packing materials from Tray 1.Exchange6 Load media in Tray 1.A BABC DE

Unpack the Exchange Printer 5Exchange7 Install the output tray.

Prepare the Original Printer6Prepare the Original PrinterOriginal1 Turn off the original printer, unplug the power cord, and remove the interface cab

Prepare the Original Printer 7Original3 Remove the waste toner bottle.Original4 Dispose of the used waste toner bottle in accordance with your local r