Konica-minolta DIMAGE Z5 User Manual download pdf (Page 38)

Manual exposure mode allows individual selection of shutter speeds and

apertures. This mode overrides the exposure system giving the

photographer total control over the final exposure.

38 A

DVANCED RECORDING

Use the up/down keys of the controller to change

the shutter speed.

MANUAL (M) EXPOSURE MODE

The changes made to the exposure will be visible in the live image on the monitor. The

monitor shutter-speed and aperture display will turn red when the shutter-release button

is pressed partway down if the image is significantly underexposed or overexposed. If the

monitor is black, increase the exposure until the image is visible; decrease the exposure

if the monitor is white.

In manual exposure mode, the auto camera-sensitivity setting will fix the ISO value at

100. The camera sensitivity can be changed in section 3 of the recording menu (p. 64).

The flash mode can be set to fill-flash, fill-flash with red-eye reduction, or slow sync. with

red-eye reduction (p. 26), but the live image will not reflect the flash exposure.

The camera-shake warning (p. 27) does not appear in M mode. IIf a slow shutter speed

is selected, noise-reduction processing is applied to the image; a message may appear

during processing. See page 39 for more on noise reduction.

Use the left/right keys of the controller to change the

aperture.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 131 132

No comments

Konica-minolta DIMAGE Z5 User Manual Page 38