Konica-minolta DIMAGE Z5 User Manual download pdf (Page 103)

103

CONNECTING THE CAMERA TO A COMPUTER

Confirm the battery has sufficient power before connecting the camera to a computer; the

full-battery indicator should be displayed on the monitor. The use of the AC adapter (sold

separately) is recommended over the use of the battery. For users with Windows 98 or

98 Second Edition, read the section on page 105 on how to install the necessary USB

driver before connecting the camera to a computer.

1.Start up the computer. The computer must be on before

connecting the camera.

2.Insert the memory card into the camera. To change the

memory card while the camera is connected to a computer,

see page 112.

3.Open the terminal cover and attach the smaller plug of the

USB cable to the camera. The arrow on the plug should

face the back of the camera. Make sure the plug is firmly

attached.

4.Attach the other end of the USB cable to the computer’s

USB port. Make sure the plug is firmly attached. The

camera should be connected directly to the computer’s

USB port. Attaching the camera to a USB hub may prevent

proper operation.

5.Press the main switch to turn on the camera. The USB

connection is made automatically; a screen appears to

indicate the operation. The monitor turns off when the

connection has been made. If the USB connection is not

made, disconnect the camera and restart the computer.

Repeat the connection procedure above.

Initializing USB connection.

Continued on next page

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 131 132

No comments

Konica-minolta DIMAGE Z5 User Manual Page 103