Konica-minolta MS7000 MKII User Manual download pdf (Page 76)

Scanner

3-43

3.22 Using the Cycle Print Mode

This function automatically scans the next image following a preset period

of time. Images are manually loaded onto the Carrier Glass in between

cycles.

This is a system setting that must be entered by an authorized Technical

Representative.

If you want to use the Cycle Print Mode, ask your Tech. Rep. to make the

necessary system setting. Then you can perform the following operations.



NOTE:

This function is only available on the PR mode.

Specifying the interval between scanning operations

Press the "10" key to change

the value to "A". This

enables the Cycle Print

Mode.

10 1 C

Press the "1" key to change

values.

Each value corresponds to

an interval between

scanning operations as

shown below.

10 1 C

Press the Memory Input key

to store the currently

selected interval setting of

the Cycle Print Mode into the

memory.

Memory

Input Key

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 153 154

No comments

Konica-minolta MS7000 MKII User Manual Page 76