Konica-minolta bizhub C20PX User Manual

bizhub C20PReference GuideA00F-9565-00A

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

Printing With NetWare82Printing With NetWareThe printer controller supports the following environments.Network Printing in a NetWare EnvironmentFor Re

Printing With NetWare 837 In Administrator mode of PageScope Web Connection, select Net Ware from the Network tab, and then specify the following sett

Printing With NetWare84For Print Server Mode With NetWare 4.x Bindery Emulation" Before using bindery emulation, check that bindery emulation is

Printing With NetWare 85– Frame Type:Select Auto. (Select the frame type according to the network envi-ronment.)– Mode: Select PServer.– Print Server

Printing With NetWare865 In Administrator mode of PageScope Web Connection, select NetWarefrom the Network tab, and then specify the following setting

Printing With NetWare 87For NetWare 4.x/5.x/6 Print Server Mode (NDS)" To use the Print Server mode, the IPX protocol must be loaded on the NetW

Printing With NetWare88– Frame Type:Select Auto. (Select the frame type according to the network envi-ronment.)– Mode: Select PServer.– Print Server N

Printing With NetWare 897 In the Gateway Types, select Novell Printer Gateway, and then register it.8 In the Configure Novell PDS for Printer Agent wi

Printing With NetWare90

Printer Utilities

 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in bin

Installing Printer Utilities on Windows92Installing Printer Utilities on Windows" You must have administrator privileges in order to install the

Understandingthe EthernetConfigurationMenus

Ethernet Menu94Ethernet MenuLocation within the Configuration MenuTCP/IPETHERNETENABLEIP ADDRESSSUBNET MASKDEFAULT GATEWAYREADYJOB TIME-OUTDHCPCAMERA

Ethernet Menu 95ENABLEBIDIREC-TIONALTELNETBONJOURDYNAMIC DNSIPPRAW PORTSLPENABLEENABLESMTPSNMPWSD PRINTIPSECIP ADDRESS FILTERIPv6ENABLENETWAREAPPLETAL

Ethernet Menu96Accessing the Ethernet MenuUse the following series of keystrokes at the printer to access the Ethernet menu options on your printer. T

Ethernet Menu 97z NETWARE - ENABLEz IEEE802.1X - ENABLE

Ethernet Menu98Using the Network Menu OptionsIf the printer is connected to a network, the following settings should be spec-ified. For details about

Ethernet Menu 99DEFAULT GATEWAYDHCPBOOTPARP/PINGPurpose Sets the address of the router/gateway if a router/gateway is used on your network and you all

Ethernet Menu100HTTP – ENABLEFTP – ENABLETELNETBONJOUR – ENABLEPurpose Select whether or not to enable HTTP. If YES is selected, HTTP is enabled. If N

Ethernet Menu 101DYNAMIC DNS – ENABLEIPP – ENABLERAW PORT – ENABLERAW PORT – BIDIRECTIONALPurpose Select whether or not to enable Dynamic DNS.If YES i

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redist

Ethernet Menu102SLP – ENABLESMTP – ENABLESNMP – ENABLEWSD PRINT – ENABLEPurpose Select whether or not to enable SLP. If YES is selected, SLP is enable

Ethernet Menu 103IPSEC – ENABLEIP ADDRESS FILTER – ACCESS PERMISSIONIP ADDRESS FILTER – ACCESS REFUSEPurpose Select whether or not to enable IPsec.If

Ethernet Menu104IPv6 – ENABLEIPv6 – AUTO SETTINGIPv6 – LINK LOCALIPv6 – GLOBAL ADDRESSIPv6 – GATEWAY ADDRESSNETWAREENABLEPurpose Select whether or not

Ethernet Menu 105APPLETALKENABLESPEED/DUPLEXIEEE802.1XENABLEPurpose Select whether or not to enable AppleTalk.If YES is selected, AppleTalk is enabled

Ethernet Menu106

Network Printing

Network Connection108Network ConnectionTheoryTo connect your printer in a TCP/IP network environment, you must make sure that the internal network add

Network Connection 109Making the ConnectionEthernet InterfaceAn RJ45 connector can be used as the Ethernet interface for this printer.When connecting

Network Connection1103 When the printer’s message window displays READY, print a configura-tion page to verify that the IP address is set.4 Install th

Network Connection 111Setting the Address ManuallyYou may also manually change the printer’s IP address, subnet mask, and gateway by using the followi

ContentsContentsi1 Operation on Mac OS X ... 1System Requirements fo

Network Connection1123 If you don’t set the subnet mask or gateway, go to step 5.If you don’t set the subnet mask, but you set the gateway, go to step

Network Connection 1134 If you don’t set the gateway, go to step 5.If you set the gateway, follow these steps.Use the and keys to move to each of

Network Connection1145 Save your configuration changes and make the printer ready for printing again.6 Print a configuration page to verify that the c

Network Printing 115Network PrintingNetwork printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP FTP HTTP IEEE802.1x IPP IP

Network Printing116server on the network, and (3) a file that can be loaded into memory to boot the workstation. This enables the workstation to boot

Network Printing 117IEEE802.1xThis protocol for determining the user authentication method within the LAN is compatible with wireless and wired LANs.

Network Printing118SLPTraditionally, in order to locate services on the network, users had to supply the host name or network address of the machine p

Network Printing 119Port 9100When printing through a network, TCP/IP port number 9100 can be used to send raw data.WSD printPrinting is possible using

Network Printing120Printing via IPP (Internet Printing Protocol)Adding an IPP Port using the Printer Driver CD-ROM" For IPP printing, specify th

Network Printing 1217 Select Internet Printing as the printing method from the pull-down list, and then click Next.8 In the Confirm Installation Setti

ContentsiiPaper Handling 30ColorSync 31Cover Page 31Error Handling 32Paper Feed 33Color Options 34Advanced Color Options/Image 35Advanced Color Option

Network Printing1229 Click Finish. This completes the installation of the printer driver.Adding an IPP Port using Add Printer Wizard - Windows Server

Network Printing 1232 In the URL field in the next dialog box enter the printer’s network path-name in one of the following formats and then choose Ne

Network Printing124Adding an IPP Port using Add Printer Wizard-Windows Vista1 Click Start, click Control Panel, and then click Printers.2 Click Add a

Network Printing 1255 In the URL field in the next dialog box enter the printer’s network path-name in one of the following formats and then choose Ne

Network Printing126Printing via Web Service Print FunctionIn Windows Vista, printers on the network that support Web Service print can be detected and

Network Printing 1276 Click Locate and install driver software (recommended).7 Click Browse my computer for driver software (advanced).

Network Printing1288 Click Browse, locate the directory on the CD-ROM where the printer driver files are located, and then click OK.9 Click Next.10 Cl

Network Printing 1296 In the dialog box, click Add a local printer.7 Click Create a new port, and then select Standard TCP/IP port.8 Click Next.

Network Printing1309 Select Web Services Device and type the IP address for the printer, and then click Next. The Found New Hardware Wizard dialog box

Network Printing 13111 Click Browse my computer for driver software (advanced).12 Click Browse, locate the directory on the CD-ROM where the printer d

Contentsiii4 Operation on NetWare ... 81Printing With NetWare 82Netw

Network Printing13215 Click Next.16 Select whether the printer driver is to be shared, and then click Next.

Network Printing 13317 Click Finish. This completes the installation of the printer driver.

Troubleshooting134TroubleshootingSymptom ActionSome client functions are not available with the Point and Print feature when the server is running Win

Using PageScopeWeb Connection

About PageScope Web Connection136About PageScope Web ConnectionThis chapter provides information on PageScope Web Connection, an HTTP (HyperText Trans

About PageScope Web Connection 137" You cannot access PageScope Web Connection using a local (USB or Parallel) connection.

Setting Up the Printer Web Page138Setting Up the Printer Web PageSetting up the printer web page to run on your network involves two basic steps: Det

Setting Up the Printer Web Page 139Internet Explorer (version 6.0 for Windows)1 Start Internet Explorer.2 From the Tools menu choose Internet Options.

Setting Up the Printer Web Page140Netscape Navigator (version 7.1)1 Start Netscape Navigator.2 From the Edit menu choose Preferences.3 Select the Adva

Understanding the PageScope Web Connection Window 141Understanding the PageScope Web Connection WindowThe illustration below identifies the navigation

ContentsivSNMP 118Port 9100 119WSD print 119Printing via IPP (Internet Printing Protocol) 120Adding an IPP Port using the Printer Driver CD-ROM 120Add

Understanding the PageScope Web Connection Window142Current StatusThe current status of the printer is displayed at the top of all PageScope Web Conne

Logging on to PageScope Web Connection 143Logging on to PageScope Web ConnectionLogin PageUser authentication, account track and language settings can

Logging on to PageScope Web Connection144Language SettingIf necessary, the display language used for Web Connection can be changed.Public User ModeIn

Logging on to PageScope Web Connection 1452 Type in the user name and user password in the User Name and User Password text boxes.3 If Account Track (

Logging on to PageScope Web Connection1461 Select Administrator.2 Click the Log in button.3 Type the password in the Admin Password text box." D

Viewing Printer Status 147Viewing Printer StatusSystem PageOn this page you find printer status and current configuration settings, printer identifica

Viewing Printer Status148Device InformationSummary (previous page)The System - Device Information - Summary window provides the follow-ing information

Viewing Printer Status 149Paper SourceThe System - Device Information - Paper Source window provides the fol-lowing information.Item DescriptionPaper

Viewing Printer Status150Paper Source (Detail)The System - Device Information - Paper Source - Detail window provides the following information.Item D

Viewing Printer Status 151Output TrayThe System - Device Information - Output Tray window provides the fol-lowing information.Item DescriptionTray Dis

ContentsvReport Types 182Direct Print 183Configuring the Printer 184System Page 184Device Information 185Counter 194Online Assistance 195Import/Export

Viewing Printer Status152StorageThe System - Device Information - Storage window provides the following information.Item DescriptionTotal Displays the

Viewing Printer Status 153Interface InformationThe System - Device Information - Interface Information window provides the following information.Item

Viewing Printer Status154Dynamic DNS If Enable is displayed, Dynamic DNS is enabled.If Disable is selected, Dynamic DNS is dis-abled.IPP If Enable is

Viewing Printer Status 155IPv6 Global AddressIdentifies the IPv6 global address of the Ethernet interface.MAC Address Identifies the Media Access Cont

Viewing Printer Status156ConsumablesThe System - Device Information - Consumables window provides the fol-lowing information.Item DescriptionConsumabl

Viewing Printer Status 157CounterThe System - Counter window provides the following information.Item DescriptionPages Printed Indicates the number of

Viewing Printer Status158Online AssistanceThe System - Online Assistance window provides the following information.Item DescriptionContact Displays th

Viewing Printer Status 159User Authentication" This page appears only when logged on to Registered User Mode.User Password ChangeThe password fo

Viewing Printer Status160Registration InformationThe registration information for the user who is logged on can be checked from the System - User Auth

Viewing Printer Status 161Output Permission InformationShows whether color printing and whether black-and-white printing is permitted by the user who

Contentsvi

Viewing Printer Status162Job PageThis page allows you to view the status of current print jobs.Active Job List (shown above)The Job - Active Job List

Viewing Printer Status 163Done Job ListThe Job - Done Job List window provides the following information for up to 49 print jobs:Item DescriptionJob N

Viewing Printer Status164Done Job List (Detail)The Job - Done Job List - Detail window provides the following information for the selected job:Item De

Viewing Printer Status 165Print PageThis page allows you to check the settings for printing when there is no PDL printer driver.Default SettingsGenera

Viewing Printer Status166Paper Size Indicates the default setting for the size of paper.Width Indicates the paper width when Paper Size is set to Cust

Viewing Printer Status 167Paper Source SettingsThe Print - Default Settings - Paper Source Settings window provides the following information.Item Des

Viewing Printer Status168Tray3This item appears only if an optional lower feeder unit is installed.Paper Size Indicates the setting for the size of pa

Viewing Printer Status 169Tray Mapping SettingsThe Print - Default Settings - Tray Mapping Settings window provides the following information.Item Des

Viewing Printer Status170PCL SettingsThe Print - Default Settings - PCL Settings window provides the following information.Item DescriptionFont Number

Viewing Printer Status 171PS SettingsThe Print - Default Settings - PS Settings window provides the following information.Item DescriptionWait Timeout

Operation onMac OS X

Viewing Printer Status172XPS SettingsThe Print - Default Settings - XPS Settings window provides the following information." This page appears o

Viewing Printer Status 173Print Quality SettingsThe Print - Default Settings - Print Quality Settings window provides the following information.Item D

Viewing Printer Status174Edge Enhancement (Image/Text/Graphics Printing)Shows the settings for whether or not edges are emphasized in images, text and

Viewing Printer Status 175Calibration Settings Tone Calibration If On is indicated, image adjustments are applied.If Off is indicated, image adjustmen

Viewing Printer Status176Camera Direct SettingsThe Print - Default Settings - Camera Direct Settings window provides the following information.Item De

Viewing Printer Status 177RGB Source Indicates the color space for RGB image data.If Device Color is indicated, the device profile of this printer is

Viewing Printer Status178Font/FormPCL FontThe Print - Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages.Ite

Viewing Printer Status 179PS FontThe Print - Font/Form - PS Font page allows you to check the list of Post-Script fonts that the printer manages.Item

Viewing Printer Status180Form OverlayThe Print - Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages.

Viewing Printer Status 181Color ProfileThe Print - Font/Form - Color Profile page allows you to check the list of color profiles that the printer mana

Copyright NoticeThe digitally encoded software and publication included with your printer are Copyrighted © 2008 by KONICA MINOLTA BUSINESS TECHNOLOGI

System Requirements for the Printer Driver2System Requirements for the Printer DriverBefore installing the printer driver, make sure that your system

Viewing Printer Status182Report TypesThe Print - Report Types window provides the following information.Item DescriptionConfiguration Page Prints the

Viewing Printer Status 183Direct PrintThe Print - Direct Print page allows you to print a file directly from the printer without starting up the appli

Configuring the Printer184Configuring the PrinterIn order to make any configuration changes through PageScope Web Con-nection, you must first enter Ad

Configuring the Printer 185Device InformationSummary (previous page)The System - Device Information - Summary window provides the follow-ing informati

Configuring the Printer186Paper SourceThe System - Device Information - Paper Source window provides the fol-lowing information.Item DescriptionPaper

Configuring the Printer 187Paper Source (Detail)The System - Device Information - Paper Source - Detail window provides the following information.Item

Configuring the Printer188Output TrayThe System - Device Information - Output Tray window provides the fol-lowing information.Item DescriptionTray Dis

Configuring the Printer 189StorageThe System - Device Information - Storage window provides the following information.Item DescriptionTotal Displays t

Configuring the Printer190Interface InformationThe System - Device Information - Interface Information window provides the following information.Item

Configuring the Printer 191IPP If Enable is displayed, IPP is enabled.If Disable is selected, IPP is disabled.LPD If Enable is displayed, LPD is enabl

Installing the Printer Driver 3Installing the Printer Driver" You must have administrator privileges in order to install the printer driver.&qu

Configuring the Printer192Network InformationType Identifies the type of network interface installed on the printer (Ethernet 10Base-T/100Base-TX/1000

Configuring the Printer 193ConsumablesThe System - Device Information - Consumables window provides the fol-lowing information.Item DescriptionConsuma

Configuring the Printer194CounterThe System - Counter window provides the following information.Item DescriptionPages Printed Indicates the number of

Configuring the Printer 195Online AssistanceThe System - Online Assistance window allows you to configure the follow-ing items.Item DescriptionContact

Configuring the Printer196Supplies and Accesso-riesSets the web address where you can purchase printer supplies and accessories.Range: Up to 127 chara

Configuring the Printer 197Import/Export" This page appears only if a hard disk kit or a CompactFlash card is installed.Job LogThe System - Impo

Configuring the Printer198User InformationThe System - Import/Export - User Information window allows you to con-figure the following items." Th

Configuring the Printer 199Authentication" This page appears only if a hard disk kit or a CompactFlash card is installed." This page doesn

Configuring the Printer200User RegistrationThe System - Authentication - User Registration window allows you to configure the following items.Item Des

Configuring the Printer 201User Registration (New Registration)The System - Authentication - User Registration - New Registration win-dow allows you t

Installing the Printer Driver44 Click Continue.5 Click Continue.

Configuring the Printer202Account NameSpecify the account that the user belongs to.Range: Up to 8 charactersDefault: [Blank]" Create the account

Configuring the Printer 203Account Track RegistrationThe System - Authentication - Account Track Registration window allows you to configure the follo

Configuring the Printer204Account Track Registration (New Registration)The System - Authentication - Account Track Registration - New Regis-tration wi

Configuring the Printer 205Function PermissionPrint Select whether or not the new account is permitted to print.Choices: Allow, RestrictDefault: Allow

Configuring the Printer206Date/TimeManual SettingsThe System - Date/Time - Manual Settings window allows you to configure the following items:Item Des

Configuring the Printer 207Minute Specifies the minute for the printer’s internal clock.Configuration Menu Equivalent:SYS DEFAULT MENU - CLOCK - TIMET

Configuring the Printer208Time Adjustment SettingsThe System - Date/Time - Time Adjust Settings window allows you to con-figure the following items:It

Configuring the Printer 209Adjustment Time Shows the last modification date and time.Default: UnknownApply button Applies the configuration settings f

Configuring the Printer210Admin PasswordThe System - Admin Password window allows you to configure the follow-ing items:Item DescriptionCurrent Passwo

Configuring the Printer 211" If you forget the new password you’ve assigned, use the printer’s SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRI

Installing the Printer Driver 56 Check the details of the license agreement, and then click Continue.7 Click Agree in the confirmation dialog box if y

Configuring the Printer212Machine SettingsThe System - Machine Settings window allows you to configure the follow-ing items:Item DescriptionAdministra

Configuring the Printer 213Do Startup Page Selects whether or not a startup page is printed when the printer is turned on.Choices: On, OffDefault: Off

Configuring the Printer214Energy Saver Time Specifies the length of time until the machine enters Energy Saver mode.This menu item appears only when E

Configuring the Printer 215ROM VersionThe System - ROM Version window provides the following information.Item DescriptionEngine ROM Version Displays t

Configuring the Printer216MaintenanceClear SettingsThe System - Maintenance - Clear Settings page allows you to reset the printer settings to its fact

Configuring the Printer 217Reset PrinterThe System - Maintenance - Reset Printer page allows you to reset the printer controller.Clear button When cli

Configuring the Printer218Status Notification SettingsThe System - Status Notification Settings window allows you to configure the following items:Ite

Configuring the Printer 219IPX Address Notification AddressSpecify the IPX address of the SNMP trap receiver. Range: 8 characters Default: 00000000Nod

Configuring the Printer220Toner Out Specifies whether or not a notification is sent when the toner is empty.Choices: Enable, DisableDefault: EnableOut

Configuring the Printer 221Apply button Applies the configuration settings for this window.Clear button Resets all configuration settings to previ-ous

Installing the Printer Driver68 In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue.9

Configuring the Printer222Job PageThis page allows you to view the status of current print jobs.Active Job List (show above)The Job - Active Job List

Configuring the Printer 223Done Job ListThe Job - Done Job List window provides the following information for up to 49 print jobs.Item DescriptionJob

Configuring the Printer224Done Job List (Detail)The Job - Done Job List - Detail window provides the following information for the selected job.Item D

Configuring the Printer 225Print PageThis page allows more detailed printer settings to be specified.Local InterfaceThe Print - Local Interface window

Configuring the Printer226Default SettingsGeneral SettingsThe Print - Default Settings - General Settings window allows you to con-figure the followin

Configuring the Printer 227Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding.If Shor

Configuring the Printer228Paper Type Specifies the default setting for the type of paper.Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Tran

Configuring the Printer 229Paper Source SettingsThe Print - Default Settings - Paper Source Settings window allows you to configure the following item

Configuring the Printer230Length Specifies the paper length when Paper Size is set to Custom Size.Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)Configura

Configuring the Printer 231Tray2 Paper Size Specifies the setting for the size of paper loaded into Tray 2.Default: Letter (U.S. model)A4 (other model

Installing the Printer Driver 710 Enter the administrator user name and password in the Authenticate dia-log box, and then click OK.11 After the insta

Configuring the Printer232Tray3This item appears only if an optional lower feeder unit is installed.Paper Size Displays the setting for the size of pa

Configuring the Printer 233Tray Mapping SettingsThe Print - Default Settings - Tray Mapping Settings window provides the following information.Item De

Configuring the Printer234PCL SettingsLogical Tray 0-9 Select the tray that is used for printing when a print job is received from another manufacture

Configuring the Printer 235The Print - Default Settings - PCL Settings window allows you to configure the following items:Item DescriptionFont Number

Configuring the Printer236CR/LF Mapping Selects CR/LF code definition in PCL language.Choices: CR=CR LF=LF, CR=CRLF LF=LF, CR=CR LF=LFCR, CR=CRLF LF=L

Configuring the Printer 237PS SettingsThe Print - Default Settings - PS Settings window allows you to configure the following items:Item DescriptionWa

Configuring the Printer238XPS SettingsThe Print - Default Settings - XPS Settings window allows you to configure the following items:Print to PS Error

Configuring the Printer 239" This page appears only if a hard disk kit or a CompactFlash card is installed.Item DescriptionDigital Signature Spe

Configuring the Printer240Print Quality SettingsThe Print - Default Settings - Print Quality Settings window allows you to configure the following ite

Configuring the Printer 241Color Separation If On is selected, color separation is per-formed.If Off is selected, color separation is not per-formed.C

Printer Setup Utility Settings8Printer Setup Utility SettingsWhen Using a USB Connection1 Use a USB cable to connect the printer to your computer.2 Op

Configuring the Printer242Edge Enhance-ment (Image/Text/Graphics Printing)Select whether image/text/graphics edges are emphasized.If On is selected, t

Configuring the Printer 243PCL SettingsContrast Specifies the contrast of the image.Choices: +15%, +10%, +5%, 0, -5%, -10%, -15%Default: 0Configuratio

Configuring the Printer244PS SettingsImage/Text/Graphics Printing (RGB Source)Specifies the color space for RGB data.Choices: Device Color, sRGB, Appl

Configuring the Printer 245Image/Text/Graphics Printing (Destination Pro-file)Specifies the ICC destination profile to be used for printed output.Choi

Configuring the Printer246Calibration SettingsTone Calibration If On is indicated, image adjustments are applied.If Off is indicated, image adjustment

Configuring the Printer 247Camera Direct SettingsClear button Resets all configuration settings to previous values.Item Description

Configuring the Printer248The Print - Default Settings - Camera Direct Settings allows you to config-ure the following items:Item DescriptionCamera Di

Configuring the Printer 249Contrast Specifies the contrast of the image.Choices: -15%, -10%, -5%, 0, +5%, +10%, +15%Default: 0Configuration Menu Equiv

Configuring the Printer250RGB Gray TreatmentSpecifies how black and grays are reproduced in RGB image data.If Composite Black is selected, black is re

Configuring the Printer 251Download Font/Form" This page appears only if a hard disk kit or a CompactFlash card is installed.PS Font" The

Printer Setup Utility Settings 94 Select bizhub C20P in the Printer Name list." If bizhub C20P does not appear, check that the printer is turned

Configuring the Printer252Form OverlayThe Print - Download Font/Form - Form Overlay window allows you to configure the following items:Delete button D

Configuring the Printer 253Color ProfileThe Print - Download Font/Form - Color Profile window allows you to con-figure the following items:Source Disp

Configuring the Printer254" When Download Manager is being used, long file names cannot be specified for downloaded form PostScript fonts, overl

Configuring the Printer 255Network PageThis page allows you to configure network settings. For more information on these protocols, see chapter 7, “Ne

Configuring the Printer256Speed Specifies the operating mode and speed for Ethernet.Choices: Auto, 10Base-T(Half), 10Base-T(Full), 100Base-TX(Half), 1

Configuring the Printer 257IPv4 SettingsThe Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information

Configuring the Printer258IP Address* Sets the printer’s IP address.Range: 0–255 for each xxx tripletDefault: 0.0.0.0" If the specified IP addre

Configuring the Printer 259IPv6 SettingsThe Network - TCP/IP - IPv6 Settings window allows you to configure the following items. For more information

Configuring the Printer260IPv6 Link Local AddressDisplays IPv6 Link Local Address. Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP -

Configuring the Printer 261RAW Port SettingsThe Network - TCP/IP - RAW Port Settings window allows you to configure the following items. For more info

Printer Setup Utility Settings10When Using a Network ConnectionThe network connection settings can be specified in one of three ways: Bonjour Setting,

Configuring the Printer262RAW Port BidirectionalSelect whether or not the RAW Port bidirectional is used. Choices: Enable, DisableDefault: DisableConf

Configuring the Printer 263DNS SettingsThe Network - TCP/IP - DNS Settings window allows you to configure the following items. For more information on

Configuring the Printer264Domain Name Automatic AcquisitionSelect whether or not the domain name automatic acquisition is used. Choices: Enable, Disab

Configuring the Printer 265IP Address FilteringThe Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations f

Configuring the Printer266Item DescriptionAccess Permis-sion AddressIf Enable is selected, the range of IP addresses permitted access to the printer c

Configuring the Printer 267Access Refuse AddressIf Enable is selected, the range of IP addresses refused access to the printer can be specified. A max

Configuring the Printer268IPsecThe Network - TCP/IP - IPsec window allows you to configure the following items. For more information on these TCP/IP,

Configuring the Printer 269IPsec (General Settings)IKE Settings /IPsec SA Set-tings /IPsec Peer Settings (Edit icon)Click this icon to display the set

Configuring the Printer270The Network - IPsec - General Settings window allows you to configure the following items. Item DescriptionIPsec Select whet

Configuring the Printer 271IPsec (IKE Settings) The Network - IPsec - IKE Settings window allows you to configure the fol-lowing items. Item Descripti

Printer Setup Utility Settings 114 Select KONICA MINOLTA bizhub C20P(xx:xx:xx) in the Printer Name list." “xx:xx:xx” refers to the last six digi

Configuring the Printer272IPsec (IPsec SA Settings)The Network - IPsec - IPsec SA Settings window allows you to configure the following items.Cancel b

Configuring the Printer 273Encryption Algo-rithm for ESPWhen ESP is selected for Security Protocol, specify the ESP encryption algorithm.Choices: None

Configuring the Printer274IPsec (IPsec Peer Settings)The Network - IPsec - IPsec Peer Settings window allows you to configure the following items.Item

Configuring the Printer 275BonjourThe Network - Bonjour page allows you to configure the following items.Encapsulation ModeSpecify the operation mode

Configuring the Printer276Bonjour Name Specify the Bonjour name for the printer.Range: Up to 63 charactersDefault: KONICA MINOLTA bizhub C20P(xx:xx:xx

Configuring the Printer 277WSDThe Network - WSD window allows you to configure the following items:Item DescriptionWSD Print Select whether to enable

Configuring the Printer278Device Name Displays the Device name.Default: KONICA MINOLTA bizhub C20P(xx:xx:xx)" Specify the settings from the Syst

Configuring the Printer 279NetWareNetWareThe Network - NetWare - NetWare window allows you to configure the fol-lowing itemsItem DescriptionNetWare Ne

Configuring the Printer280Frame Type Specifies the Frame Type.Choices: Auto, Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAPDefault: AutoMo

Configuring the Printer 281Preferred NDS Context NameSets the Preferred NDS Context for the printer.Range: Up to 191 charactersDefault: [Blank]Preferr

SOFTWARE LICENSE AGREEMENTThis package contains the following materials provided by Konica Minolta Business Technolo-gies, Inc. (KMBT): software inclu

Printer Setup Utility Settings127 Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setu

Configuring the Printer282NetWare StatusThe Network - NetWare - NetWare Status window allows you to configure the following items:Item DescriptionFile

Configuring the Printer 283IPPThe Network - IPP window allows you to configure the following items. For details on IPP, refer to chapter 7, “Network

Configuring the Printer284Accept IPP Job Sets whether or not to accept IPP Job.Choices: Enable, DisableDefault: EnablePrinter Name Displays the printe

Configuring the Printer 285Operational SupportPrint Job If this check box is selected, Print Job is enabled.Default: CheckedValidate Job If this check

Configuring the Printer286Apply button Applies the configuration settings for this window.Clear button Resets all configuration settings to previous v

Configuring the Printer 287FTPServerThe Network - FTP - Server window allows you to configure the following items:Item DescriptionFTP Server Enables o

Configuring the Printer288SNMPThe Network - SNMP window allows you to configure the following items:Item DescriptionSNMP SNMP If Enable is selected, S

Configuring the Printer 289SNMP v1(IPX)If Enable is selected, SNMP v1(IPX) is enabled.Choices: Enable, DisableDefault: EnableUDP Port Specifies the UD

Configuring the Printer290Read Security LevelSpecifies the security level for read only user.Choices: None, Auth-password, Auth-password/Priv-password

Configuring the Printer 291Trap Set-tingsAllow Set-tingSpecifies whether or not to permit the Trap settingsChoices: Allow, RestrictDefault: AllowTrap

Printer Setup Utility Settings 13AppleTalk Setting1 Connect the printer to an Ethernet network.2 Open Printer Setup Utility, which can be accessed by

Configuring the Printer292AppleTalkThe Network - AppleTalk window allows you to configure the following items:Item DescriptionAppleTalk If Enable is s

Configuring the Printer 293EmailSend EmailThe Network - Email - Send Email window allows you to configure the fol-lowing items:Clear button Resets all

Configuring the Printer294Port Num-berSpecifies the port number of the mail transmission server.Range: 1 - 65535Default: 25Connec-tion Time-outSpecifi

Configuring the Printer 295SSL/TLSSSL/TLS InformationThe Network - SSL/TLS - SSL/TLS Information page allows you to specify SSL/TLS settings." A

Configuring the Printer296SSL/TLS Setting (When a certificate is not installed)The Network - SSL/TLS - SSL/TLS Setting page allows you to select the f

Configuring the Printer 297SSL/TLS Setting (When a certificate is installed)The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol-

Configuring the Printer298Self-signed Certificate SettingThe Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certifica

Configuring the Printer 299Locality Specify the name of the municipality.Range: Up to 127 charactersDefault: [Blank]State/Province Specify the name of

Configuring the Printer300Request a certificateThe Network - SSL/TLS - Request a Certificate page allows you to config-ure the following items:Item De

Configuring the Printer 301State/Province Specifies the name of the state or province.Range: Up to 127 charactersDefault: [Blank]Country Specify the n

Printer Setup Utility Settings144 Select BHC20P-xxxxxx in the Printer Name list." “xxxxxx” refers to the last six digits of the MAC address (in

Configuring the Printer302Certificate RequestThe Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certific

Configuring the Printer 303Install a CertificateThe Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the

Configuring the Printer304Encryption Strength Setting" This menu item appears if a certificate is installed.The Network - SSL/TLS - Encryption S

Configuring the Printer 305Remove a Certificate" This menu item appears if a certificate is installed.The Network - SSL/TLS - Remove a Certifica

Configuring the Printer306Mode Using SSL/TLS" This menu item appears if a certificate is installed.The Network - SSL/TLS - Mode Using SSL/TLS pa

Configuring the Printer 307AuthenticationUser AuthenticationThe Network - Authentication - User Authentication page allows you to specify user authent

Configuring the Printer308Public Access Select whether or not logon as a Public user is per-mitted when authentication settings have been speci-fied.C

Configuring the Printer 309Auto LogoutNetwork - Authentication - Auto Logout window allows you to configure the following items.Item DescriptionAdmin.

Configuring the Printer310IEEE802.1xThe Network - Authentication - IEEE802.1x window allows you to configure the following items:Item DescriptionIEEE8

Configuring the Printer 311User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification.

Printer Setup Utility Settings 15IP Printing Setting1 Connect the printer to an Ethernet network.2 Open Printer Setup Utility, which can be accessed b

Configuring the Printer312Client Certificate Shows whether or not a client certificate has been specified." Specify the settings from the Networ

Configuring the Printer 313CA CertificateCA Certificate InformationThe Network - Authentication - CA Certificate - CA Certificate Informa-tion window

Configuring the Printer314CA Certificate Setting (When a certificate is installed)The Network - Authentication - CA Certificate - CA Certificate Setti

Configuring the Printer 315CA Certificate Setting (When a certificate is not installed)The Network - Authentication - CA Certificate - CA Certificate

Configuring the Printer316Install a CertificateThe Network - Authentication - CA Certificate - Install a Certificate page allows you to install the ce

Configuring the Printer 317Remove a CertificateThe Network - Authentication - CA Certificate - Remove a Certificate page allows you to delete the inst

Configuring the Printer318

IndexIndex319AAccount Mode 143Account Mode, PageScope Web Connection 143Active job list, PageScope Web ConnectionPrint job status 162Administrator Mod

Index320Printer, via PageScope Web Connection 184Configuration, PageScope Web Connection 184AppleTalk 292Camera Direct settings 176, 247Certificate re

Index321IEEE802.1x, PageScope Web Connection 310IKE Settings, PageScope Web Connection 271Install a certificate, PageScope Web Connection 303, 316Inst

Printer Setup Utility Settings165 Select desired print protocol from the Protocol pop-up menu." - For an IPP setup, select Internet Printing Pro

Index322PPage setup settings 21Custom paper size options 23Page attributes options 22PageScope Web Connection 136Account Track registration 203Active

Index323Password, PageScope Web Connection 210PCL font, PageScope Web Connection 178PCL settings, PageScope Web Connection 170, 234Port 9100 119Print

Index324Machine settings 212Password 210Reset printer 217ROM version 215Status notification settings 218Time adjustment settings 208TTCP/IP, PageScope

Printer Setup Utility Settings 176 Enter the IP address for the printer in the Address text box." - For an LPD setup, “lp” in the Queue text box

Printer Setup Utility Settings189 Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setu

Selecting Print Options 19Selecting Print Options1Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then

Selecting Print Options204 Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup, and

Specifying Page Setup Settings 21Specifying Page Setup SettingsThe following dialog box appears when Page Setup... is selected from the File menu in t

11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer

Specifying Page Setup Settings22Page Attributes OptionsThe Page Attributes section is used to specify the settings for the paper size, scaling, and pr

Specifying Page Setup Settings 23Custom Paper Size OptionsYou can also specify a paper size that is not listed in the Paper Size pop-up menu.1 Select

Specifying Print Settings24Specifying Print SettingsThe following dialog box appears when Print... is selected from the File menu in the application b

Specifying Print Settings 25Print Dialog BoxSection DescriptionCopies & Pages This section contains options for the number of copies to be printed

Specifying Print Settings26" No warning message will be displayed if options cannot be used together are selected.Common buttons ? (Help button

Specifying Print Settings 27Copies & PagesThe Copies & Pages section is used to specify the number of copies to print and the range of pages t

Specifying Print Settings28LayoutThe Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages

Specifying Print Settings 29SchedulerThe Scheduler section is used to specify the timing and priority for printing jobs. Print DocumentNow: Select th

Specifying Print Settings30Paper HandlingThe Paper Handling section is used to specify the pages that are to be printed and the order in which the pag

Specifying Print Settings 31ColorSync Color ConversionAllows you to select host-based color matching or printer-based color matching. Quartz FilterA

4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for

Specifying Print Settings32 Billing InfoAllows you to set billing information printed on cover page.Error Handling PostScript ErrorsAllows you to se

Specifying Print Settings 33Paper FeedThe Paper Feed section is used to specify the paper feed setting. All pages fromAll pages in the document are p

Specifying Print Settings34Color Options Quick ColorAllows you to select a color preset. BrightnessAllows you to set Brightness. Color as Grayscale

Specifying Print Settings 35Advanced Color Options/Image RGB SourceAllows you to select RGB color profiles for images. RGB IntentAllows you to selec

Specifying Print Settings36 Download ManagerClick this button to start up the installed Download Manager." In order to start up Download Manage

Specifying Print Settings 37 Edge EnhancementAllows you to select Edge Enhancement for text. Hide Advanced OptionsClick this button to hide the Adva

Specifying Print Settings38 RGB IntentAllows you to select color intent for RGB graphics. RGB Gray TreatmentAllows you to select RGB gray treatment

Specifying Print Settings 39Advanced Color Options/Simulation Simulation ProfilesAllows you to select color profiles for simulation. Match Paper Col

Specifying Print Settings40" In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into th

Specifying Print Settings 41Supply LevelsThe Supply Levels section provides information for checking the amount of service life remaining on each cons

9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such

Specifying Print Settings42SummaryThe Summary is used to check the currently selected print settings.

Troubleshooting 43TroubleshootingSymptom SolutionThe setting in the saved presets are not applied.Depending on the functions selected for the printer,

Troubleshooting44The specified name can-not be used for the name of a custom paper size.Due to the limitations of Mac OS X, the follow-ing names canno

Operation onthe XPS Driver forWindows

Installing the Printer Driver46Installing the Printer Driver" For the system requirements for the printer driver, refer to the User's Guide

Installing the Printer Driver 475 Select the connection type according to the environment.For a local connection: Click Use an existing port, and then

Installing the Printer Driver487 Select TCP/IP device in the Device type list and type the IP address for the printer in the Hostname or IP address te

Installing the Printer Driver 498 Choose Have Disk, locate the directory on the CD-ROM where the printer driver files are located, and then choose OK.

Installing the Printer Driver509 Click Next.10 Click Next.

Installing the Printer Driver 5111 Select whether the printer driver is to be shared, and then click Next.

5. All company names and product names used in this document is the trademarks or regis-tered trademarks of their respective holder.This ICC Profile m

Installing the Printer Driver5212 Click Finish.This completes the installation of the printer driver.

Selecting Print Options/Defaults 53Selecting Print Options/Defaults" You must have administrator privileges in order to install the printer driv

Selecting Print Options/Defaults546 Select the General tab.7 Click Printing Preferences.

Selecting Print Options/Defaults 558 Select the default settings for your printer, such as the default media for-mat you use, on the appropriate tabs.

Uninstalling the Printer Driver56Uninstalling the Printer Driver1Close all applications.2 From the Start menu, click Control Panel, then Printers.3 Ri

Specifying Printer Driver Settings 57Specifying Printer Driver Settings1Click Start, click Control Panel, and then click Printers.2 Right-click the KO

Specifying Printer Driver Settings58 AdvancedClick this button to display the Advanced Options pane.Advanced Options Paper SizeSelect the output med

Specifying Printer Driver Settings 59 Image/Text/Graphics Edge EnhancementSelect Edge Enhancement for images/text/graphics. Edge StrengthSet the edg

Specifying Printer Driver Settings60

Operation onLinux

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson (tjh@cryp

System Requirements for the Printer Driver62System Requirements for the Printer DriverBefore installing the printer driver, make sure that your system

Installing PPD File From the Command Line 63Installing PPD File From the Command Line" Before proceeding with the installation, be sure to exit

Adding the Printer64Adding the Printer" After copying the PPD file, be sure to restart CUPS.1 Start up the Web browser.2 Enter the URL “http://l

Adding the Printer 656 Select a Device Port from the Device list, then click con-tinue.- TCP/IP: AppSocket/HP Jet-Direct, Internet Printing Pro-tocol

Adding the Printer6610 Select KONICA MINOLTA bizhub C20P PPD (en), then click Continue.The following message appears.

Specifying Printer Driver Settings 67Specifying Printer Driver SettingsDisplaying the Settings Page1 Start up the Web browser.2 Enter the URL “http://

Specifying Printer Driver Settings68Printer Driver SettingsExtraParameters SettingsBrightness Specifies the brightness of the image as -15%, -10%, -5%

Specifying Printer Driver Settings 69GeneralParameters SettingsCollate If On is selected, all pages in the documents are printed as sets of printouts.

Specifying Printer Driver Settings70Graphics OptionsImage OptionsParameters SettingsGraphics Edge Enhance-mentSelect whether graphic edges are empha-s

Specifying Printer Driver Settings 71Options InstalledImage RGB Intent Specifies RGB intent for image as Vivid, Photographic, Relative Color, or Absol

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHA

Specifying Printer Driver Settings72SimulationText OptionsParameters SettingsCMYK Gray Treatment Specifies simulation gray treatment as Com-posite Bla

Specifying Printer Driver Settings 73BannersParameters SettingsStarting Banner Specifies the starting banner as none, clas-sified, confidential, secre

Printing a Document74Printing a DocumentThe contents and available options that appear in the print dialog box may vary depending on the application b

Printing a Document 75Example Using OpenOffice" The procedure for printing on Red Hat 9 with OpenOffice 1.0.2 is described below. The following

Printing a Document764 Click Import.Driver Installation dialog box appears.5 Click Browse.6 In the Path, enter “/usr/share/cups/model”, then click Sel

Printing a Document 778 In the Please select a suit-able driver list, select KON-ICA MINOLTA bizhub C20P OpenOffice PPD, then click Next.9 Select the

Printing a Document7814 Click Print in the File menu.The Print dialog box appears.15 Select the name of the printer specified in the Ope-nOffice print

Checking Print Jobs 79Checking Print JobsYou can check the status of print jobs from a Web browser.1 Start up the Web browser.2 Enter the URL “http://

Troubleshooting80TroubleshootingSymptom ActionThe printer stops because of a paper size error or a paper type error.The job may have been sent with a

Operation onNetWare