bizhub 42/36 5-17
5.7 Settings
5
Original Direction
Select the orientation of the original. After the document is scanned, the data is processed so that it is cor-
rectly oriented.
Orig. Binding Position
Select the binding position of the original when it has punched holes or is stapled. This adjusts the scan of
double-sided originals so that the binding position is not reversed.
Item Description
[Top] Select this setting when the document is loaded with its top edge at the top.
[Bottom] Select this setting when the document is loaded with its top edge at the bot-
tom.
[Left] Select this setting when the document is loaded with its top edge at the left.
[Right] Select this setting when the document is loaded with its top edge at the right.
Item Description
[Left Bind] Select this setting if there is a binding position on the left of the original.
[Top Bind] Select this setting if there is a binding position on the top of the original.
[Auto] Sets the binding position to the long side if the size is 11-11/16 inches (297
mm) or smaller, or the short side otherwise.
Comments to this Manuals