Konica-minolta PagePro 1350EN User Manual download pdf (Page 41)

Resetting the printer to factory defaults

If the printer was manually configured to an invalid IP address, or moved to a

different network, and communication cannot be established anymore, you

might have to reset it to factory settings to re-enable DHCP/BOOTP auto-

matic protocols. In such a case, please follow these steps:

1 Turn on your printer.

When the green “Ready” indicator is on, reset the printer to factory

default.

2 Make sure that

– the orange “Error” indicator is off.

– the green “Ready” indicator is on (but not blinking).

3 Press the cancel button for more than 20 seconds, until:

– the orange “Error” indicator and the green “Ready” indicator are slowly

blinking alternately (about 1 blink per second).

4 Press the cancel button one more time.

– the green “Ready” indicator blinks for a few seconds, then stops blink-

ing and remains on.

5 Restart the printer to use the new (factory) settings.

1 ... 40 41 42 ... 112

No comments

Konica-minolta PagePro 1350EN User Manual Page 41