Transmission Applications
7
bizhub 750/600 7-39
Transmission Applications Chapter 7
3 Press [F-Code TX].
4 Enter Box No. of the receiving station in the box of SUB Address. Press
[Password] and then enter the password with keypad if necessary.
– SUB Address and Password can be numbers of up to 20 digits.
– When communicating with the FK-502, input 9 digits or less for the
Box No. and 8 digits or less for the Password. The required digits
are different depending on the device.
– Numerals between 0-9, and symbols # and * can be used for
Password.
– To correct a wrong entry, use [Del.].
– Press [C] (clear) to clear the whole entry.
– To release the setting, press [OFF].
If a password is needed, press YES and enter the password.
5 Press [OK].
The Comm. Setting screen will be restored.
6 Press [OK].
The FAX screen will be restored.
7 Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-10 for
information about setting functions in the FAX screen. See
Comments to this Manuals