Konica-minolta MS7000 MKII User Manual download pdf (Page 19)

Operation

3-2

3.2 Loading the Roll Film

1 Mount the Roll Film onto the Reel

Shaft and unwind the leading edge of

the film.

2 Take hold of the Carrier Handle and

pull it forward fully, then the Film

Pressure Glass will open.

3 Insert the leading edge of the film

between the Glasses.

4 Insert the leading edge of the film into

the slit in the Take-Up Reel and rotate

the Take-Up Reel two to three turns

so that the film leader is wound

around the Take-Up Reel.

NOTE Be sure to set the film so

that its winding direction is

to be clockwise.

The film will not be

correctly rewound if the

open reel roll film is

mounted in the opposite

direction.

NOTE Make Sure that the film

runs under the Left and

Right Guide Rollers.

UC8_UG.book 2 ページ２０１０年２月２５日　木曜日　午後１２時２９分

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Konica-minolta MS7000 MKII User Manual Page 19