Konica-minolta magicolor 4690MF User Manual download pdf (Page 5)

Starting the Firmware Updater

You must have administrator privileges in order to update the

firmware.

Before starting the firmware updater, make sure that the printer

is correctly connected with a USB cable.

Before starting the firmware updater, confirm that the scanner

driver (TWAIN driver) is installed with a USB connection. In case

of magicolor 1680MF, confirm that the printer driver is installed

with a USB connection before starting the firmware updater.

When the firmware is updated, the printer control panel settings

may return to their defaults. Before starting the firmware updater,

be sure to print the configuration page to check the settings. For

details on printing the configuration page, refer to the printer’s

User’s Guide.

Do not perform any of the following operations while updating

the firmware.

- Turn off the printer.

- Turn off the computer running the firmware updater.

- Exit the firmware updater.

- Send a print job to the printer.

Starting the Firmware Updater

CAUTION

1 2 3 4 5 6 7 8 9

No comments

Konica-minolta magicolor 4690MF User Manual Page 5