Printing With NetWare 3-3
7 In Administrator mode of PageScope Web Connection, select NetWare
from the Network tab, and then specify the following settings.
– Enable NetWare: Checked
– Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Operating Mode: Select Remote Printer.
– Print Server Name: Specify print server name created in step 4.
– Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
8 Restart the printer (turn the printer off, then on again).
9 Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as Waiting for Job for the
connected printer (0).
Comments to this Manuals