Konica-minolta bizhub C451 User Manual download pdf (Page 7)

If you’re configuring the Copier and Fiery with 2 Static IP Address you will need to do the

following:

1. You will need a HUB/ Switch and 3 Patch Cables [RJ45]

2. One Patch Cable connected to the Customer Network

3. One Patch Cable connected from the HUB/ Switch to the Fiery

4. One Patch Cable connected from the HUB/ Switch to the Copier NIC.

Please see picture below.

5. By performing this type of setup you will have 2 independent IP Addresses and utilizing

a bit more hardware.

Note: For the actual Installation [Hardware Installation] please refer to the Fiery’s:

“Video Interface Kit/ Image Controller Fiery X3eTY 50-45C-KM Installation Manual”

1 2 3 4 5 6 7

No comments

Konica-minolta bizhub C451 User Manual Page 7