Konica-minolta bizhub 601 User Manual download pdf (Page 25)

751/601 1-19

Before use

1.6.4 Selecting the position of the binding margin (Original

Binding Position/Binding Position settings)

If a double-sided original is loaded into the ADF, specify the position of the top

of the back side of the original by specifying the binding margin position for

the original.

Position the original to be copied.

– For details on positioning the original, refer to "Feeding the original" on

page 1-11.

In the Basic screen, touch [Duplex/Combine]. Otherwise touch the

Original Settings tab.

Setting Description

Left Bind

Left

Select this setting if the original is loaded with the binding margin at the left.

Top Select this setting if the original that is loaded has a binding margin at the

top.

Right Bind

Right

Select this setting if the original is loaded with the binding margin at the

right.

Auto With this setting, the binding margin is set at the top or at the left.

Select this setting to automatically select the position of the binding margin.

If the original length is 11-11/16 inch (297 mm) or less, a binding position

along the long side of the original is selected.

If the original length is more than 11-11/16 inch (297 mm), a binding position

along the short side of the original is selected.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 100 101

No comments

Konica-minolta bizhub 601 User Manual Page 25