Konica-minolta BIZHUB C360 User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 311
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
bizhub C360/C280/C220 6-12
6.1 Mac OS X 10.2/10.3/10.4/10.5
6
3 Select [AppleTalk] for the connection method, and then select the zone to which the machine is con-
nected.
Connected printers are detected.
% If no printer is detected, turn this machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
4 From the [Name] list, select the desired model name.
The printer driver corresponding to the selected printer name is automatically selected.
% After the printer driver is selected, go to Step 6.
% If an incorrect printer driver is selected, go to Step 5.
5 Select the desired printer driver manually.
% From [Printer Model], select [KONICA MINOLTA], and then select the desired model from the list of
model names.
6 Click [Add].
When the selected printer is registered in the [Printer List], the setting procedure is completed.
Configuring the LPR settings
[TCP/IP Settings] for the machine
Specify the IP address for the machine.
[LPD Setting] for the printer
Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.
d Reference
For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].
For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 310 311

Comments to this Manuals

No comments