Konica-minolta BIZHUB C360 User Manual download pdf (Page 195)

bizhub C360/C280/C220 8-5

8.1 Paper

5 Close the LCT tray.

d Reference

To configure paper settings:

Press [Basic] ö [Paper].

Loading paper into the Bypass Tray

1 Open the Bypass Tray.

% To load large-sized paper, pull out the tray extension.

NOTICE

Be careful not to touch the surface of the Paper Take-Up Roller

with your hand.

2 With the side to be printed on facing down, insert the paper as far as possible into the feed slot.

% The image will be printed on the surface of the paper facing down when the paper is loaded into the

bypass tray.

% Do not load so many sheets of paper that the top of the stack is higher than the mark.

% If paper is curled, flatten it before loading it.

% Push the Lateral Guide firmly up against the edges of the paper.

% Load letterhead paper so that the side to be printed on faces up.

% When loading postcards:

Load them in the w orientation, as shown in the illustration. To

use postcards other than the

4 e 6 (A6) size, check the size of postcards to be used, and

then specify the size on the Custom Size screen before using

them.

% When loading Transparency:

Load them in the v orientation, as shown in the illustration.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 284 285

No comments

Konica-minolta BIZHUB C360 User Manual Page 195