Konica-minolta BIZHUB C360 User Manual download pdf (Page 150)

bizhub C360/C280/C220 7-13

7.1 [System Settings]

[Media Adjustment]

Adjust defective print images caused by paper type features.

1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]

ö [Printer Adjustment] ö [Media Adjustment].

2 Select a paper type to be adjusted.

% If defective images exist on the back side of 2-sided copy paper, select [2nd Side].

3 Press [+] or [-] to specify an adjusted value.

% If missing parts or white spots exist in print images, press [-]. If the surface of the print image is

rough, press [+].

4 Press [OK] ö [Close].

5 Copy, and then check the print image.

[Center Staple Position]

Adjust the stapling position for each paper size when printing with the center staple function.

0 Adjust the half-fold position before adjusting the center stapling position.

0 Before making any adjustments, create a sample using the center staple function. Adjust the center sta-

ple position while checking the created sample.

0 This adjustment is available if the Saddle Stitcher SD-509 is installed.

0 When stapling in parallel with the left edge of paper, contact your service representative.

1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]

ö [Finisher Adjustment] ö [Center Staple Position].

2 Select the size of paper of which the center staple position is adjusted.

3 Press [+] or [-] to adjust the staple position while checking the sample.

4 Press [OK].

5 Create a sample, and check the print result.

d Reference

To adjust the half-fold position:

Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Fin-

isher Adjustment] ö [Half-Fold Position].

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 284 285

No comments

Konica-minolta BIZHUB C360 User Manual Page 150