Konica-minolta bizhub 181 User Manual Page 117
- Page / 322
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4
Making copies
4-24 bizhub 181
Making copies Chapter 4
Loading envelopes into the bypass tray
Load envelopes into the manual bypass tray one at a time.
A maximum of 10 envelopes can be loaded into the multi bypass tray.
2
Reminder
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
After envelopes have been loaded, specify the paper size and paper type
settings from the control panel.
% Load envelopes with the flap side facing up, as shown in the illustra-
tion.
– For details on specifying the settings for the paper size and paper
type, refer to steps 4 through 7 of the procedures in “Copying onto
manually fed paper (manual bypass tray)” on page 4-27 and “Cop-
ying onto manually fed paper (multi bypass tray)” on page 4-30.
- User’s Guide 1
- Introduction 2
- Contents 4
- 3 Before making copies 6
- 4 Making copies 6
- 5 Advanced copy operations 7
- 7 When a message appears 10
- 8 Troubleshooting 10
- 9 Appendix 10
- 10 Index 11
- Available copy features 12
- Book separation copying 13
- Reduced/full-sized/enlarged 13
- Grouping 14
- Crisscross sorting 14
- Crisscross grouping 14
- Negative/positive inverting 15
- Page margins 15
- Mixed document widths 15
- Legal restrictions on copying 20
- Installation and operation 22
- 1.1 Safety information 23
- 7 WARNING 30
- 7 ADVARSEL 33
- 7 VAROITUS 33
- 7 VARNING 33
- 7 ADVARSEL! 34
- 7 ATTENTION 35
- 1.3 Installation precautions 37
- Precaution 42
- 2 Precaution 43
- Precaution Chapter 2 44
- 22 23 24 2625 54
- 2.4 Power supply 58
- 5 Press the [OK] key 64
- Before making copies 66
- 3.2 Copy/print area 71
- 3.3 Paper storage 72
- 3.4 Loading paper 73
- 1 Pull out the 1st paper 74
- 2 Press down on the pa 75
- 3 Load the paper into the 75
- 4 Slide the paper guides to 76
- 5 Close the 1st paper 76
- 1 Pull out the drawer 77
- 5 Close the paper drawer 79
- 3.5 Original documents 80
- 1 Slide apart the adjusta 83
- 2 Load the document so 83
- 3 Slide the document 84
- 2 Position the document 85
- 3 Place a blank sheet of 87
- 2 Place the book on the 88
- 3-24 bizhub 181 89
- 4 Press the [Mixed Origi 91
- 5 Press the [Paper] key 92
- 7 Press the [Start] key 92
- 3-28 bizhub 181 93
- Making copies 94
- 2 Press the [Quality] key 100
- 5 Press the [Start] key 101
- 2 Press the [Density] key 102
- 2 During copying, press 104
- 2 Press the [Paper] key 105
- Making copies Chapter 4 106
- 2 Insert one sheet of paper 120
- 3 Slide the paper guides to 120
- 8 Select “RETURN” 122
- 10 Press the [Start] key 122
- 2 Load the paper with the 123
- 3 Adjust the tray extension 123
- 3 Press the [Utility] key 127
- 12 Press the [Start] key 129
- 14 Press the [Paper] key 134
- 16 Press the [Start] key 134
- 11 Press the [Start] key 143
- 4.6 Specifying a Zoom setting 144
- 2 Press the [Zoom] key 145
- 6 Press the [Start] key 147
- 2 Press the [Function] key 150
- 7 Press the [Back] key 151
- 9 Press the [Start] key 151
- 1 Press the [Interrupt] key 155
- 1 With the main screen 157
- 4 Press the [OK] key 158
- 5 Press the [Back] key 158
- Advanced copy 160
- NON-SORT 161
- 1 Load the document into 164
- 2 Press the [Finishing] key 164
- 2 Position the first page of 166
- 3 Press the [Finishing] key 166
- 8 Press the [Start] key 167
- 3 Press the [Combine 169
- 2 Press the [Combine 171
- PATTERN1 PATTERN2 172
- 1 Position the first page of 175
- 2 Press the [Simplex/Du 175
- LEFT ERASE 182
- UPPER ERASE 182
- FRAME ERASE 182
- Left binding 187
- 2 Press the [Mode Memo 190
- 2 Press the [Access] key 194
- 4 Press the [Start] key 194
- Advanced copy operations 195
- 5-36 bizhub 181 195
- Utility mode/Copy mode 196
- 6.1 Utility mode 197
- 6.3 MACHINE SETTING 200
- 1 Press the [Utility] key 201
- 6.4 PAPER SOURCE SETUP 213
- Reminder 228
- 6.7 ADMIN. MANAGEMENT 229
- 6.8 COPY SETTING 1 247
- 6.9 COPY SETTING 2 262
- SF-501 is installed 270
- 6-76 bizhub 181 271
- When a message appears 272
- 1 Open the front door 274
- 2 Open the toner bottle 274
- 3 While holding the sealed 275
- 4 With the side of the toner 275
- 5 Lightly tap the bottom of 276
- 6 Close the toner bottle 276
- 7 CAUTION 278
- 1 Open the right-side door 278
- 2 Pull down the fusing unit 279
- 3 Slowly pull out the pa 280
- 4 While holding the guide 280
- 5 While turning the knob 281
- 6 Close the right-side door 281
- 7 Pull out the 1st paper 282
- 8 Remove all paper from 282
- 9 Slide the paper guides to 283
- 10 Close the 1st paper 283
- 1 Open the right-side 284
- 2 Slowly pull out the pa 284
- 3 Close the right-side 285
- 4 Pull out the paper draw 285
- 5 Remove all paper from 286
- 6 Slide the paper guides to 286
- 7 Close the paper drawer 287
- 1 Remove all paper from 288
- 2 Open the right-side door 288
- 4 Close the right-side door 290
- 5 Reload paper into the 290
- 1 Open the duplex unit 291
- 2 Carefully pull out any 291
- 3 Close the duplex unit 292
- 1 Open the misfeed-clear 293
- 2 Remove all document 294
- 3 Lift open the document 294
- 4 While turning the knob 295
- 5 Close the document 295
- 6 Reload the tray with the 296
- Troubleshooting 300
- Troubleshooting Chapter 8 302
- Appendix 304
- Appendix Chapter 9 306
- 9.2 Care of the machine 310
- Index Chapter 10 318
- Printed in China 322
- A08E-9551-00 322
Related products and manuals for Hardware Konica-minolta bizhub 181
(92 pages)
Hardware Konica-minolta bizhub 211 User Manual
(352 pages)
(352 pages)
© 2020, manymanuals.com. All rights reserved. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals