Konica-minolta IC-204 User Manual download pdf (Page 86)

Setting Up Network Printing

IC-204 3-21

5 In Administrator mode of PageScope Web Connection, select “Net-

Ware Setting” from the Network tab, and then specify the following set-

tings.

IPX Setting: Select “ON”.

Ethernet Frame Type: Select “Auto Detect”. (Select the frame type ac-

cording to the network environment.)

NetWare Print Mode: Select “Nprinter/Rprinter”.

Print Server Name: Specify the print server name created in step 4.

Printer Number: Specify the printer number (0-255). When 255 is spec-

ified, the setting is “Auto Detect”.

6 Restart this machine (turn the main power off, then on again).

– When turning the power off, then on again, be sure to turn the sub-

power switch off first, then the main power switch. In addition, wait

at least 10 seconds before turning the power on again; otherwise,

this machine may not function properly.

7 Use the NetWare server console to load PSERVER.NLM.

8 Use the NetWare server console to display the print server screen, and

then check that “bizhub 500/420/360” (created printer) is shown as

“Waiting for Job” for the connected printer (0).

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 129 130

No comments

Konica-minolta IC-204 User Manual Page 86