Konica-minolta bizhub C300 User Manual download pdf (Page 165)

Application Software

4-10 C300

Application Software Chapter 4

4.2 PageScope Box Operator

PageScope Box Operator is application software used exclusively for chang-

ing the name of scan or fax data stored in a User Box, downloading or delet-

ing such scan or fax data, creating a User Box, changing the properties (user

attributes) of a User Box, and performing other tasks. It allows a network-

connected PC to gain access to the HDD of the machine for accomplishing

these tasks.

When an attempt is made to gain access to the machine through PageScope

Box Operator, the user is authenticated to be an authorized user by using an

8-to-64-digit User Password and an 8-digit User Box Password. During the

authentication procedure, the password entered appears as “*.” When the

Enhanced Security mode is set to [ON], the number of times in which authen-

tication fails is counted.

Note

Do not leave the site while you are gaining access to the machine through

PageScope Box Operator. If it is absolutely necessary to leave the site,

be sure first to log off from the PageScope Box Operator.

4.2.1 Accessing User Box

Reminder

If the “Save logon user name” check box has been selected, the User

Password entered is stored in the PC being used. If you do not want the

User Password stored, clear the “Save logon user name” check box.

If the “Save box password until disconnected” check box has been se-

lected, the User Box Password entered is stored in the PC being used. If

you do not want the User Box Password stored, clear the “Save box

password until disconnected” check box.

< From the PC>

1 Start the PageScope Box Operator.

c300_security_E.book 10 ページ２００７年４月１１日　水曜日　午前１０時４２分

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 187 188

No comments

Konica-minolta bizhub C300 User Manual Page 165