Security Function Ver. 1.02 Jul. 2010 5. Checking the firmware version number
3
bizhub C360/C280/C220
for PKI Card System
5. Checking the firmware version number
• Confirm the need to enhance or not to enhance the security function with the administra-
tor of this machine: If administrator wants to enhance, check the firmware version num-
ber and the checksum value.
• If the firmware version number of this machine is different from numbers shown in the list
below, it will be necessary to re-write to the firmware version corresponding to security.
Refer to P.28 for the method of how to re-write the firmware.
5.1 Security authentication firmware version number
Refer to P.12 for the method of checking the firmware version.
6. Accessing the Service Mode
6.1 Access method to the Service Mode
1. Press the Utility/Counter key.
2. Touch [Meter Count].
3. Touch [Check Details] on Meter Count display.
4. Press the following keys in this order:
Stop00 Stop 0 1
5. Enter the CE Password.
NOTE
• Authentication using the CE Password is carried out only if “ON” is set for
[CE Authentication] as accessed through [Service Mode] [Enhanced Security].
NOTE
• The CE password entered is displayed as “✱.”
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KMBT.
MFP Controller Ver. Check Sum
bizhub C360/C280/C220 A0ED0Y0-0100-GM0-31 111A
Comments to this Manuals